• Mala Valve Dealers / Distributors in India
  • Mala Valve Suppliers / Exporter in India

Mala Valve Dealers / Distributors in Mumbai India

Mala Valves Suppliers Dealers Distributors in Mumbai India

Mala Ball Valve Suppliers, Mala Globe Valves Exporters, Mala Y Type Strainer Valves Dealer, Mala Cast Iron Safety Valve Dealer, Mala Check Valve Supplier, Mala Pressure Reducing Valve, Mala Steam Traps Dealer in Mumbai India


Mala stainless steel 316 valves, stainless steel 316 ball valve, stainless steel 316 gate valves, stainless steel 316 needle valves, 316 stainless steel ball valves, 316 stainless steel butterfly valves, 316 stainless steel gate valves, stainless steel 304 valves, stainless steel 304 ball valve, stainless steel 304 gate valves, stainless steel 304 needle valves, 304 stainless steel ball valves, 304 stainless steel butterfly valves, 304 stainless steel gate valves, stainless steel butterfly valve price list, ss butterfly valves manufacturers in India

Ball Valve
Mala Valve Suppliers Dealers Distributors in India
  • The valves are designed to ensure that ball port fully aligns with body throat port in fully open position.The blow out proof over size steam operated the valve safety   Read more
Globe Valve
Mala Valve Suppliers Dealers Distributors in India
  • The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.   Read more
Y Type Strainer
Mala Valve Suppliers Dealers Distributors in India
  • The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications. Read more
Cast Iron Safety Valve
Mala Valve Suppliers Dealers Distributors in India
  • One of the most widely used and oldest of the stainless steels. This was originally called for its chromium and nickel content. It possesses an excellent combination   Read more
Check Valve
Mala Valve Suppliers Dealers Distributors in India
  • To ensure long and trouble free valve performance, seating surface are accurately machined, precisely aligned, and perfectly lapped. Removable, seal welded seat ring or integral seat (Cast SS only) available.  Read more
Pressure Reducing Valve
Mala Valve Suppliers Dealers Distributors in India
  • Specially designed die formed graphite packing, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions meet 100 PPM maximum fugitive emission levels.   Read more
Steam Traps
Mala Valve Suppliers Dealers Distributors in India
  • Specially designed die formed graphite packing, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions meet 100 PPM maximum fugitive emission levels.   Read more

Types of Nisha Valves ?

Ball Valve

Mala Ball Valves

Code No. = MM 304

MALA® Cast Iron Ball Valve
With Stainless Steel (AISI - 410) Working Parts, Teflon 
Seat & Seal.
Pressure Rating PN -10
Screwed Female BSP Threads
Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
Size Range - 15mm (1/2 ") - 100mm (4 ")

Code No. = MM 305

MALA® Cast Iron Ball Valve Flg. Ends
With Stainless Steel (AISI - 410) Working Parts, Teflon Seat & Seal.
Pressure Rating PN - 10
Flanges as per BS : 10 Table - D (Undrilled)
Hyd. Tested - Body 25 Kgf / cm2 (350 PSIG)
Size Range - 4mm ( 1/8 ") - 150mm( 6 ")

Mala Bronze Ball Valve

Code No. = MM 201

  • MALA® Bronze Ball Valves 
    With Stainless Steel (AISI - 410) Working
    Parts, Teflon Seat & Seal.
  • Pressure Rating PN-10 to PN-16
  • Screwed Female BSP Threads 
  • Hyd. Tested - 20 Kgf / cm2 (300 PSIG) 
  • Size Range - 15mm (1/2 ") - 100mm( 4 " )

Code No. = MM 201F

  • MALA® Bronze Ball Valve Flg. Ends 
    With Stainless Steel (AISI - 410) Working 
    Parts, Teflon Seat & Seal.
  • Pressure Rating PN - 10 to PN - 16
  • Flanges as per BS L 10 Table-D (Undrilled)
  • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
  • Size Range - 15mm ( 1/2 ") - 100mm ( 4 " )

The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.

The company supplies valves that are ISI & IBR approved.

PRODUCT :- Ball Valves, Cast Steel Globe Valves, Cast steel Gate Valves, Cast Steel Check Valves,Flush Bottom Valves, Butterfly Valves, Steam Traps, Pilot Operated Pressure, Reducing Valves, Safety Valves, Butterfly Valves, Saunders – Diaphragm Valves, Strainers, Disc Check Valves, ISI / IBR Globe Valve, ISI / IBR Gate Valve, Globe Steam Stop Valve, SIGHT GLASS Cast Steel Globe Valve, Ball Valve for Water, ETC.

Stainless Steel Grades:

304 SSl - 304H & 304L - One of the most widely used and oldest of the stainless steels. This was originally called 18-8 which stood for its chromium and nickel content. It possesses an excellent combination of strength and corrosion resistance

310 SS - 310H - The strength of this alloy is a combination of good strength and corrosion resistance in temperatures up to 2100 F

316 SS - 316L - is an austenitic stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys.

317 SS - 317 is a high chromium, nickel and molybdenum version of 316 stainless designed principally for increased strength and corrosion resistance.

Mala Ball Valves Application

Industries We Serve

  • Industrial Facilities
  • Oil Refineries
  • Gas Industry
  • Petrochemical Complexes
  • Environmental Water Treatment
  • Building Construction
  • Chemicals
  • Pharmaceuticals
  • Synthetics

Mala Ball Valves Price

FOB Price: US $32 to $2000 Piece


Globe Valves

  • Mala Stainless Steel Globe Valves

    Code No. = MM 445

    • MALA® Cast Steel Globe Steam Stop Valves PN -40 
      Straight Pattern, Bolted Bonnet, Outside Screw 
      & Yoke Type, Rising Steam With Back Seat Arrangements
      , Renewable Stainless Steel (AISI - 410) Seat & Steam, 
      Handwheeel Operated
    • Flanged as per BS : 4504 (Undrilled) 
    • Hyd. Tested - Body 60 Kgf / cm2 (852 PSIG) 
      Seat 40 Kgf / cm2 (568 PSIG)
    • Size Range - 15mm (1/2 ") - 200mm( 8 " )

      Code No. = MM 449

      • MALA® Forged Steel (A-105) Globe Valve Class - 800 
        Bolted Bonnet, Reduced Bore,Outside Screw &
        Yoke Type, Renewable Stainless Steel (AISI - 410)
        Working Parts, Rising Stem with Back Seat Arrangement, 
        Conforming to BS : 5352 Screwed Female Ends to 
        NPT Threads/Socket Welded Ends
      • Hyd. Tested - Body : 211 Kgf / cm2, Seat 141 Kgf / cm2
      • Size Range - 15mm (1/2 ") to 50mm ( 2 " )

      Mala Cast Iron Steel Globe Valves

      Code No. = MM 301

      • MALA® Cast Iron Wheel Valve PN -10 
        With Gun Metal Parts, Screwed Female BSP Threads
      • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
      • Size Range - 15mm (1/2 ") - 50mm( 2 " )

        Code No. = MM 302

        • MALA® Cast Iron Wheel Valves Single Side Flange PN - 10 
          with Gun Metal Parts
        • Flanged as per BS : 10 Table D (Undriied)
        • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
        • Size Range - 15mm ( 1/2 ") - 50mm( 2 " )

         Code No. = MM 303

        • MALA®Cast Iron Wheel Valve Flanged PN - 10
          with Gun Metal Parts, Flanged as per BS : 10 Table D
        • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
        • Size Range - 15mm (1/2 ") - 100mm( 4 " )

         Code No. = MM 437

        • MALA® Cast Iron Globe Steam Stop Valve PN -16 
          Straight Pattern, Screwed-in-Bonnet, Outside Screw 
          & Yoke Type, Rising Steam With Back Seat 
          Arrangements, Renewable Stainless Steel 
          (AISI - 410) Working Parts, Handwheeel Operated
        • Flanges as per BS : 5152 / DIN 2533 (PN - 16) 
          upto 6" & DIN 2532 (PN - 10) for 8" & above
        • Hyd. Tested - Body 26 Kgf / cm2 (370 PSIG) for PN - 16 
          Seat 16 Kgf / cm2 (230 PSIG)
        • Size Range - 15mm (1/2 ") - 200mm( 8 " )

         Code No. = MM 438

        • MALA® Cast Iron Junction Steam Stop Valves PN - 16 
          Right Angle Pattern, Bolted Bonnet, Outside Screw 
          & Yoke Type, Rising Steam with Back Seat 
          Arrangement, Renewable Stainless Steel (AISI - 410) 
          Working Parts, Handwheel Operated
        • Flanged as per BS : 5152 / DIN 2553 (PN - 16) upto 
          6" & DIN 2532 (PN - 10) for 8" & above
        • Hyd. Tested - Body 26 Kgf / cm2 (370 PSIG) for PN -16 
          Seat 16 Kgf / cm2 (230 PSIG)
        • Size Range - 15mm ( 1/2 ") - 200mm( 8 " )

        Mala Bronze Globe Valves

        Code No. = MM 105

        • MALA® Bronze Globe Valves 
          Conforming to IS : 778 Screwed-in-Bonnet integral Seat, 
          Inside Screw Rising Forged Stem 
          Screwed Female Ends Conforming to IS : 554.
          (Available in CI -1 & CI -2 )
        • Hyd. Tested - CI -1 : - Body : 1.5 Mpa Seat :1.0 Mpa
          CI -2 : - Body : 2.4 Mpa Seat : 1.6 Mpa 
        • Size Range - 15mm (1/2 ") - 100mm( 4 " )

        Code No. = MM 106

        • MALA® Bronze Globe Valve Flanged 
          Conforming to IS : 778 Screwed-in-Bonnet integral 
          Seat, Inside Screw Rising Forged Stem 
          Flanged Ends. (Available in CI -1 & CI -2 )
        • Hyd. Tested -CI -1 : - Body : 1.5 Mpa Seat :1.0 Mpa
          CI -2 : - Body : 2.4 Mpa Seat : 1.6 Mpa
        • Size Range - 15mm ( 1/2 ") - 100mm( 4 " )

        Code No. = MM 202

        • MALA® Bronze Wheel Valve Super 
          Pressure Rating PN -10 to PN -16
        • Screwed Female BSP Threads
        • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
        • Size Range - 15mm (1/2 ") - 100mm( 4 " )

        Code No. = MM 203

        • MALA® Bronze Wheel Valves No. 4 
          Pressure Rating PN -20
        • Screwed Female BSP Threads
        • Hyd. Tested - Body 25 Kgf / cm2 (350 PSIG)
        • Size Range - 4mm ( 1/8 ") - 150mm( 6 " )

        Code No. = MM 204

        • MALA® Bronze Wheel Valves No.5 
          Pressure Rating PN -25
        • Screwed Female BSP Threads
        • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
        • Size Range - 8mm (1/4 ") - 100mm( 4 " )

          MM 235 available with Renewable S.S working Parts, 
          we can also be provide Teflon / Neoprene seating on demand.

        Code No. = MM 238

        • MALA® Bronze Union Bonnet Wheel Valve Flanged No.9F 
          with Renewable S.S working Parts
          Flanged as per BS : 10 Table 'I' (Undriied)
        • Pressure Rating PN -25
        • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
        • Size Range - 15mm (1/2 ") - 100mm( 4 " )

         Code No. = MM 239

        • MALA® Bronze Steam Stop Valve
          with Renewable S.S working Parts
        • Screwed Female BSP Threads
        • Pressure Rating PN -30
        • Hyd. Tested -40 Kgf / cm2 (600 PSIG)
        • Size Range - 15mm ( 1/2 ") - 100mm ( 4 " )

         Code No. = MM 401

        • MALA® Bronze Globe Steam Stop Valve 
          Straight Pattern, Screwed-in-Bonnet, Inside Screw, 
          Rising Steam With Back Seat Arrangements, 
          Renewable Stainless Steel (AISI - 410) Working Parts, 
          Handwheeel Operated
        • Screwed Female BSP Taper Threads to BS : 21 
        • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)      
          Suitable for Max. Steam Working Pressure 17.58 Kgf / cm2 at 225°C
        • Size Range - 15mm (1/2 ") - 50mm(2 " )

        Code No. = MM 402

        • MALA® Bronze Globe Steam Stop Valve Flanged 
          Straight Pattern, Screwed-in-Bonnet, Inside Screw, Rising Steam With Back Seat Arrangements, Renewable Stainless Steel (AISI - 410) Working Parts, Handwheeel Operated
        • Flanges as per BS : Table - H (Undrilled)
        • Hyd. Tested -35 Kgf / cm2 (500 PSIG) 
          Suitable for Max. Steam Working Pressure 17.58 Kgf / cm2 at 225°C
        • Size Range - 15mm ( 1/2 ") - 50mm( 2 " )

        The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.

        The company supplies valves that are ISI & IBR approved.

        PRODUCT :- Ball Valves, Cast Steel Globe Valves, Cast steel Gate Valves, Cast Steel Check Valves,Flush Bottom Valves, Butterfly Valves, Steam Traps, Pilot Operated Pressure, Reducing Valves, Safety Valves, Butterfly Valves, Saunders – Diaphragm Valves, Strainers, Disc Check Valves, ISI / IBR Globe Valve, ISI / IBR Gate Valve, Globe Steam Stop Valve, SIGHT GLASS Cast Steel Globe Valve, Ball Valve for Water, ETC.

        Mala Globe Valves Application

        Industries We Serve

        • Industrial Facilities
        • Oil Refineries
        • Gas Industry
        • Petrochemical Complexes
        • Environmental Water Treatment
        • Building Construction
        • Chemicals
        • Pharmaceuticals
        • Synthetics

        Mala Globe Valves Price

        FOB Price: US $32 to $2000 Piece

Y Type Strainer Valves

Mala Y Type Strainer in Stainless Steel

Code No. = MM 460

  • MALA® Cast Steel 'Y' Type Strainer Flg. 
    with Stainless Steel (AISI - 304) Perforated Screen, 
    Flanges as per BS : 10 
    Table 'J' (Undrilled)
  • Hyd. Tested - 50 Kgf / cm2
  • Size Range - 25mm (1 ") to 100mm ( 4 " )

Mala Y Type Strainer in Cast Iron Steel

Code No. = MM 441

  • MALA® Cast Iron 'Y' Type Strainer Screwed
    Screwed in Cover 
  • Stainless Steel (304) Screen having 1mm Dia Perforations
  • Screwed Female BSP Parallel Threads to BS : 21
  • Hyd. Tested - Body 26 Kgf / cm2 (370 PSIG)
    Suitable for Max. 13 Kgf / cm2 at 220 °C
  • Size Range - 15mm ( 1/2 ") - 50mm( 2 " )

Code No. = MM 442

  • MALA® Cast Iron 'Y' Type Strainer Flanged
    Bolted Cover with Stainless Steel (304) 
    Screen having 1mm Dia Perforations
  • Flanges as per BS : 10 Table - F (Undrilled)
  • Hyd. Tested - Body 26 Kgf / cm2 (370 PSIG)
    Suitable for Max. 13 Kgf / cm2 at 220 °C
  • Size Range - 15mm (1/2 ") - 100mm( 4 " )

Mala Y Type Strainer in Bronze

Code No. = MM 251

  • MALA® Bronze 'Y' Type Strainer 
    With S.S. (AISI - 304) Perforated Screen
    Screwed Female BSP Threads
  • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
  • Size Range - 15mm (1/2 ") - 50mm( 2 " )

Code No. = MM 429

  • MALA® Bronze 'Y' Type Strainer Scr. 
    Screwed in Cover, With SS (304) Perforated Screen
  • Screwed Female BSP Taper Threads to BS : 21
  • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
    Suitable for Max. 17.58 Kgf / cm2 at 225 °C
  • Size Range - 15mm ( 1/2 ") - 50mm( 2 " )

Code No. = MM 430

  • MALA® Bronze 'Y' Type Strainer Flanged
    Screwed in Cover, With SS (304) Perforated Screen
  • Flanges as per BS : 10 Table - H (Undrilled)
  • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
    Suitable for Max. 17.58 Kgf / cm2 at 225 °C
  • Size Range - 15mm (1/2 ") - 50mm( 2" )

The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.

The company supplies valves that are ISI & IBR approved.

PRODUCT :- Ball Valves, Cast Steel Globe Valves, Cast steel Gate Valves, Cast Steel Check Valves,Flush Bottom Valves, Butterfly Valves, Steam Traps, Pilot Operated Pressure, Reducing Valves, Safety Valves, Butterfly Valves, Saunders – Diaphragm Valves, Strainers, Disc Check Valves, ISI / IBR Globe Valve, ISI / IBR Gate Valve, Globe Steam Stop Valve, SIGHT GLASS Cast Steel Globe Valve, Ball Valve for Water, ETC.

Stainless Steel Grades:

304 SSl - 304H & 304L - One of the most widely used and oldest of the stainless steels. This was originally called 18-8 which stood for its chromium and nickel content. It possesses an excellent combination of strength and corrosion resistance

310 SS - 310H - The strength of this alloy is a combination of good strength and corrosion resistance in temperatures up to 2100 F

316 SS - 316L - is an austenitic stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys.

317 SS - 317 is a high chromium, nickel and molybdenum version of 316 stainless designed principally for increased strength and corrosion resistance.

Mala Butterfly Valves Application

Industries We Serve

  • Industrial Facilities
  • Oil Refineries
  • Gas Industry
  • Petrochemical Complexes
  • Environmental Water Treatment
  • Building Construction
  • Chemicals
  • Pharmaceuticals
  • Synthetics

Mala Butterfly Valves Price

FOB Price: US $32 to $2000 Piece

Cast Iron Safety Valve

Mala Cast Iron Safety Valve

Code No. = MM 455

  • MALA® Cast Iron Single Post Spring Loaded High Lift Safety Valve 
    Right Angle pattern, Renewable Stainless Steel (AISI - 410) Seat & Stem
  • Flanges as per BS : 10 Table - F (Undrilled)
  • Hyd. Tested -Body 21 kgf / cm2  ( 300 PSIG )
    Suitable for Max. 10.5 kgf / cm2 at 220°C
  • Size Range - 25mm (1" ) - 50mm(2 " )

Code No. = MM 456

  • MALA® Cast Iron Double Post Spring Loaded High Lift Safety Valve 
    Renewable Stainless Steel (AISI - 410) Seat & Disc
  • Flanges as per BS : 10 Table - F (Undrilled)
  • Hyd. Tested - Body 21 kgf / cm2  ( 300 PSIG )
    Suitable for Max. 10.5 kgf / cm2 at 220°C
  • Size Range - 25mm (1 ") - 50mm(2 " )


Mala Bronze Safety Valve

Code No. = MM 247

  • MALA® Bronze Relief Valve
    Open Discharge 

    Screwed Male Inlet
  • Set Pressure - 50 -150 PSIG
  • Size Range - 15mm (1/2") - 50mm( 2" )

Code No. = MM 248

  • MALA® Bronze Relief Valve
    Enclosed Discharge 

    Screwed Male Inlet & Female Outlet
  • Set Pressure - 50 - 150 PSIG
  • Size Range - 15mm (1/2") - 50mm(2 " )

Code No. = MM 425 / MM 426

  • MALA® Bronze Spring Loaded Safety Valve Pop Type Scr. / Flg. 
    Open Discharge, with Renewable Stainless Steel (AISI - 410) Seat & Disc
  • MM 425 Screwed Male Inlet / MM 426 Flanges as per BS : 10 Table - H (Undrilled)
  • Hyd. Tested - 35 kgf / cm2  ( 500 PSIG )
    Max. Set Pressure 250 Psig at 225°C
  • Size Range - 15mm (1/2") - 50mm(2 " )

Code No. = MM 427 / MM 428

  • MALA® Bronze Spring Loaded Safety Valve Pop Type Scr. / Flg. 
    Enclosed Discharge, with Renewable Stainless Steel ( AISI - 410 ) Seat & Disc
  • MM 425 Screwed Male Inlet / MM 426 Flanges as per BS : 10 Table - H (Undrilled)
  • Hyd. Tested -35 kgf / cm2  ( 500 PSIG )
    Max. Set Pressure 250 Psig at 225°C
  • Size Range - 15mm (1/2") - 50mm( 2" )

The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.

The company supplies valves that are ISI & IBR approved.

PRODUCT :- Ball Valves, Cast Steel Globe Valves, Cast steel Gate Valves, Cast Steel Check Valves,Flush Bottom Valves, Butterfly Valves, Steam Traps, Pilot Operated Pressure, Reducing Valves, Safety Valves, Butterfly Valves, Saunders – Diaphragm Valves, Strainers, Disc Check Valves, ISI / IBR Globe Valve, ISI / IBR Gate Valve, Globe Steam Stop Valve, SIGHT GLASS Cast Steel Globe Valve, Ball Valve for Water, ETC.

Stainless Steel Grades:

304 SSl - 304H & 304L - One of the most widely used and oldest of the stainless steels. This was originally called 18-8 which stood for its chromium and nickel content. It possesses an excellent combination of strength and corrosion resistance

310 SS - 310H - The strength of this alloy is a combination of good strength and corrosion resistance in temperatures up to 2100 F

316 SS - 316L - is an austenitic stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys.

317 SS - 317 is a high chromium, nickel and molybdenum version of 316 stainless designed principally for increased strength and corrosion resistance.

Mala Safety Valves Application

Industries We Serve

  • Industrial Facilities
  • Oil Refineries
  • Gas Industry
  • Petrochemical Complexes
  • Environmental Water Treatment
  • Building Construction
  • Chemicals
  • Pharmaceuticals
  • Synthetics

Mala Safety Valves Price

FOB Price: US $32 to $2000 Piece

Check Valves

Mala Stainless Steel Check Valve

Code No. = MM 446

  • MALA® Cast Steel Horizontal Check Valve PN-40 
    Straight Pattern, Bolted Cover, Renewable 
    Stainless Steel (AISI -410) Working Parts 
  • Flanges as per BS : 4504 (Undriied)
  • Hyd. Tested - Body 60 Kgf / cm2 (852 PSIG)
    Seat 40 Kgf / cm2 (568 PSIG)
  • Size Range - 15mm ( 1/2 ") - 200mm( 8 " )

Mala Stainless Steel Check Valve

Code No. = MM 450

  • MALA® Forged Steel (A-105) Check Valve Class - 800 
    Bolted Cover, Reduced Bore, Renewable Stainless Steel 
    (AISI - 410) Working Parts, Conforming to BS : 5352
    Screwed Female Ends to NPT Threads/Socket Welded Ends
  • Hyd. Tested - Body : 211 Kgf / cm2, Seat 141 Kgf / cm2
  • Size Range - 15mm (1/2 ") to 50mm ( 2 " )

Mala Cast Iron Check Valve

Code No. = MM 439

  • MALA® Cast Iron Lift Check Valve PN -16
    Straight Pattern, Bolted Cover, Renewable 
    Stainless Steel (AISI -410) Working Parts
  • Flanges as per BS : 5152 / DIN 2533 (PN - 16) 
    upto 6" & DIN 2532 (PN-10) for 8" & Above 
  • Hyd. Tested - Body 26 Kgf / cm2 (370 PSIG) for PN-16 
    Seat 16 Kgf / cm2 (230 PSIG) 
  • Size Range - 15mm (1/2 ") - 200mm( 8 ")

Code No. = MM 440

  • MALA® Cast Iron Lift Check Valve PN-16 
    Right Angle Pattern, Bolted Cover, Renewable 
    Stainless Steel (AISI-410) Working Parts
  • Flanges as per BS : 5152 / DIN 2553 (PN-16) upto 
    6" DIN 2532 (PN-10) for 8" & Above
  • Hyd. Tested -Body 26 Kgf / cm2 (370 PSIG) for PN - 16 
    Seat 16 Kgf / cm2 (230 PSIG)
  • Size Range - 15mm ( 1/2 ") - 200mm( 8 " )

Code No. = MM 458

  • MALA® Cast Iron Swing Check Valve 
    Bolted Cover, Renewable Stainless Steel (AISI-410) Seat
  • Flanges as per BS : 10 Table -F, (Undrilled)
  • Hyd. Tested - Body 26 Kgf / cm2 (370 PSIG)
    Seat 16 Kgf / cm2 (230 PSIG)
  • Size Range - 40mm (1 1/2 ") - 100mm( 4 " )

Mala Bronze Check Valve

Code No. = MM 107

  • MALA® Bronze Horizontal Check Valve 
    Conforming to IS : 778. Screwed Female Ends, 
    Conforming to IS : 554 (Available in CI -1 & CI -2)
  • Hyd. Tested - CI -1 : - Body : 1.5 Mpa Seat : 1.0 Mpa    
    CI -2 : - Body : 2.4 Mpa Seat : 1.6 Mpa
  • Size Range - 15mm (1/2 ") - 100mm(4 " )

Code No. = MM 108

  • MALA® Bronze Horizontal Check Valve Flanged. 
    Conforming to IS : 778. Screwed Female Ends
    (Available in CI -1 & CI -2)
  • Hyd. Tested -CI -1 : - Body : 1.5 Mpa Seat : 1.0 Mpa    
    CI -2 : - Body : 2.4 Mpa Seat : 1.6 Mpa
  • Size Range - 15mm ( 1/2 ") - 100mm( 4 " )

Code No. = MM 219

  • MALA® Bronze Horizontal Check Valves Super 
    Pressure Rating PN - 16 
    Screwed Female BSP Threads
  • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
  • Size Range - 15mm (1/2 ") - 150mm( 6 " )

Code No. = MM 220

  • MALA® Bronze Horizontal Check Valves No.4 
    Pressure Rating PN - 20 
    Screwed Female BSP Threads
  • Hyd. Tested - 25 Kgf / cm2 (350 PSIG)
  • Size Range - 4mm ( 1/8 ") - 150mm( 6 " )

Code No. = MM 221 / 241

  • MALA® Bronze Horizontal Check Valves No.5
    Pressure Rating PN - 25
  • MM 221 with G.M & MM 241 with Stainless Steel
    (AISI -40 ) Working Parts 
    Screwed Female BSP Treads 
  • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
  • Size Range - 15mm (1/2 ") - 100mm( 4 " )

Code No. = MM 256

  • MALA® Bronze Swing Check Valve
    Integral Seat 
    Screwed Female BSP Threads
  • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
  • Size Range - 15mm (1/2 ") - 50mm( 2 ")

Code No. = MM 223

  • MALA® Bronze Horizontal Check Valve Flanged No.8 
    Flanged as per BS : 10 Table 'H' (Undrilled)
  • Pressure Rating PN - 10 to PN -16
  • Hyd. Tested -20 Kgf / cm2 (300 PSIG)
  • Size Range - 15mm ( 1/2 ") - 150mm( 6 " )

 

Code No. = MM 243

  • MALA® Bronze Horizontal Check Valve No.9 
    with Stainless Steel (AISI -40) Working Parts 
    Screwed Female BSP Threads
  • Pressure Rating PN -25
  • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
  • Size Range - 8mm (1/4 ") - 100mm( 4 " )

Code No. = MM 244

  • MALA® Bronze Horizontal Check Valve Flanged No.9F 
    with Stainless Steel (AISI -40) Working Parts 
    Flanged as per BS : 10 Table 'F' (Undrilled)
  • Pressure Rating PN - 25
  • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
  • Size Range - 15mm ( 1/2 ") - 100mm( 4 " )

Code No. = MM 412

  • MALA® Bronze Horizontal Lift Check Valve 
    Straight Pattern, Screwed in Cover, Renewable 
    Stainless Steel (AISI -410) Working Parts
  • Screwed Female BSP Taper Threads to BS : 21 
  • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
    Suitable for Max. Steam Working Pressure
    17.58 Kgf / cm2 at 225oC
  • Size Range - 15mm (1/2 ") - 50mm( 2 " )

The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.

The company supplies valves that are ISI & IBR approved.

PRODUCT :- Ball Valves, Cast Steel Globe Valves, Cast steel Gate Valves, Cast Steel Check Valves,Flush Bottom Valves, Butterfly Valves, Steam Traps, Pilot Operated Pressure, Reducing Valves, Safety Valves, Butterfly Valves, Saunders – Diaphragm Valves, Strainers, Disc Check Valves, ISI / IBR Globe Valve, ISI / IBR Gate Valve, Globe Steam Stop Valve, SIGHT GLASS Cast Steel Globe Valve, Ball Valve for Water, ETC.

Stainless Steel Grades:

304 SSl - 304H & 304L - One of the most widely used and oldest of the stainless steels. This was originally called 18-8 which stood for its chromium and nickel content. It possesses an excellent combination of strength and corrosion resistance

310 SS - 310H - The strength of this alloy is a combination of good strength and corrosion resistance in temperatures up to 2100 F

316 SS - 316L - is an austenitic stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys.

317 SS - 317 is a high chromium, nickel and molybdenum version of 316 stainless designed principally for increased strength and corrosion resistance.

Mala Check Valves Application

Industries We Serve

  • Industrial Facilities
  • Oil Refineries
  • Gas Industry
  • Petrochemical Complexes
  • Environmental Water Treatment
  • Building Construction
  • Chemicals
  • Pharmaceuticals
  • Synthetics

Mala Check Valves Price

FOB Price: US $32 to $2000 Piece

Pressure Reducing Valve

  • Code No. = MM 435

    • MALA® Bronze Spring Loaded Diaphragm Type Pressure Reducing Valve 
    • With Metallic Diaphragm
    • Screwed Female BSP Taper Threads to BS : 21
    • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
      Suitable for Max. 17.58 Kgf / cm2 at 225°C
    • Size Range - 15mm (1/2") - 50mm( 2" )

    The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.

    The company supplies valves that are ISI & IBR approved.

    PRODUCT :- Ball Valves, Cast Steel Globe Valves, Cast steel Gate Valves, Cast Steel Check Valves,Flush Bottom Valves, Butterfly Valves, Steam Traps, Pilot Operated Pressure, Reducing Valves, Safety Valves, Butterfly Valves, Saunders – Diaphragm Valves, Strainers, Disc Check Valves, ISI / IBR Globe Valve, ISI / IBR Gate Valve, Globe Steam Stop Valve, SIGHT GLASS Cast Steel Globe Valve, Ball Valve for Water, ETC.

    Stainless Steel Grades:

  • 304 SSl - 304H & 304L - One of the most widely used and oldest of the stainless steels. This was originally called 18-8 which stood for its chromium and nickel content. It possesses an excellent combination of strength and corrosion resistance
  • 310 SS - 310H - The strength of this alloy is a combination of good strength and corrosion resistance in temperatures up to 2100 F
  • 316 SS - 316L - is an austenitic stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys.
  • 317 SS - 317 is a high chromium, nickel and molybdenum version of 316 stainless designed principally for increased strength and corrosion resistance.

Mala Pressure Reducing Valves Application

Industries We Serve

    • Industrial Facilities
    • Oil Refineries
    • Gas Industry
    • Petrochemical Complexes
    • Environmental Water Treatment
    • Building Construction
    • Chemicals
    • Pharmaceuticals
    • Synthetics

Mala Pressure Reducing Valves Price

FOB Price: US $32 to $2000 Piece

Steam Traps

  • Steam Traps

    MALA® Stainless Steel ( AISI - 420 ) Thermodynamic Steam Trap

    Code No. = MM 444

    • MALA® Stainless Steel ( AISI - 420 ) Thermodynamic Steam Trap 
      Investment Casted, With in built Stainless Steel ( AISI - 304 ) Strainer Screwed Ends as per BSP
    • Suitable for max. 31.64 kgf / cm2
      450 PSIG at 425°C
    • Size Range - 15mm ( 1/2 ") - 25mm( 1" )

    MALA® Cast Iron Steel Steam Traps

    MALA® Cast Iron Vertical Inverted Bucket Type Steam Trap

    Code No. = MM 443

    • MALA® Cast Iron Vertical Inverted Bucket Type Steam Trap 
      Suitable for Saturated Steam Working Pressure 150 Psig., With SS (304) Working Parts
    • Screwed Female BSP Parallel Threads to BS : 21
    • Hyd. Tested - Shell 26 kgf / cm2 ( 370 PSIG) 
      Suitable for Max. 13 Kgf / cm2 at 220 °C
    • Size Range - 15mm (1/2 ") - 50mm( 2" )

    MALA® Bronze Steam Traps

    MALA® Bronze Thermodynamic Steam Trap

    Code No. = MM 253 / 254

    • MALA® Bronze Thermodynamic Steam Trap 
      With S.S. (AISI - 410) Working Parts, In built Strainer (AISI - 304) Screen
    • Screwed Female BSP Threads
    • Hyd. Tested - 20 Kgf / cm2 (300 PSIG)
    • Size Range - 15mm (1/2 ") - 25mm( 1 " )

    MALA® Bronze Thermodynamic Steam Trap

    Code No. = MM 431

    • MALA® Bronze Thermodynamic Steam Trap 
      With S.S. (AISI - 410) Working Parts, In built Strainer (AISI - 304) Screen
    • Screwed Female BSP Taper Threads to BS : 21
    • Hyd. Tested - 35 Kgf / cm2 (500 PSIG)
      Suitable for Max. 17.58 Kgf / cm2 at 225 °C
    • Size Range - 15mm ( 1/2 ") - 25mm( 1" )

    The company is run by highly experienced technical personnel's who are well versed with the technical requirements of valves for various industries and for various applications.

    The company supplies valves that are ISI & IBR approved.

    PRODUCT :- Ball Valves, Cast Steel Globe Valves, Cast steel Gate Valves, Cast Steel Check Valves,Flush Bottom Valves, Butterfly Valves, Steam Traps, Pilot Operated Pressure, Reducing Valves, Safety Valves, Butterfly Valves, Saunders – Diaphragm Valves, Strainers, Disc Check Valves, ISI / IBR Globe Valve, ISI / IBR Gate Valve, Globe Steam Stop Valve, SIGHT GLASS Cast Steel Globe Valve, Ball Valve for Water, ETC.

    Stainless Steel Grades:

  • 304 SSl - 304H & 304L - One of the most widely used and oldest of the stainless steels. This was originally called 18-8 which stood for its chromium and nickel content. It possesses an excellent combination of strength and corrosion resistance
  • 310 SS - 310H - The strength of this alloy is a combination of good strength and corrosion resistance in temperatures up to 2100 F
  • 316 SS - 316L - is an austenitic stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys.
  • 317 SS - 317 is a high chromium, nickel and molybdenum version of 316 stainless designed principally for increased strength and corrosion resistance.

Mala Steam Traps Application

Industries We Serve

    • Industrial Facilities
    • Oil Refineries
    • Gas Industry
    • Petrochemical Complexes
    • Environmental Water Treatment
    • Building Construction
    • Chemicals
    • Pharmaceuticals
    • Synthetics

Mala Steam Traps Price

FOB Price: US $32 to $2000 Piece

 




LARGEST VALVES MANUFACTURERS / SUPPLIERS / DEALERS IN INDIA

  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
  • Mala Valve Suppliers Dealers Distributors in India
    Mala Valve
    Suppliers
 
  
OUR SUMMARY:
Review Date
Reviewed Product
Mala Valve
Author Rating
5Mala ValveMala ValveMala ValveMala ValveMala Valve