• Scorpio Valves Dealers / Distributors in India
  • Scorpio Valves Suppliers / Exporter in India

Scorpio Valves Dealers / Distributors in Mumbai India

Scorpio Valves Suppliers Dealers Distributors in Mumbai India

Scorpio Valves Dealers in India, Scorpio Gate Valves, Scorpio Globe Valves, Scorpio Check Valves, Scorpio Trunnion Mounted Ball Valves, Scorpio Cryogenic Valves, Scorpio Pressure Seal Valves


Scorpio Inconel Valves, Scorpio Duplex Valves, Scorpio Hastelloy Valves, Scorpio Super Duplex Valves, Scorpio Stainless Steel Valves, Scorpio Low Temperature Valves, Scorpio Nuclear Valves, Scorpio Oxygen Services Valves, Scorpio Fugitive Emission Valves, Scorpio Spring-loaded and pilot-operated safety relief valves

Automatic Control Valve
Scorpio Valves Suppliers Dealers Distributors in India
Safety Relief Valve
Scorpio Valves Suppliers Dealers Distributors in India

Series 401 valves operate bubble tight at higher pressure to set pressure ratios, allowing operators to run very close to the system's maximum allowable working pressure.   Read more

Control Valve
Scorpio Valves Suppliers Dealers Distributors in India

These valves are very useful in preventing back flow of water to the pump. These valves have minimum head loss and can be very competitive in terms of long service life.   Read more

Ball Valve
Scorpio Valves Suppliers Dealers Distributors in India

Scorpio steel ball valves are designed and manufactured to provide maximum service life and dependability. All Ball valves are full ported and meet the design requirements of American Petroleum   Read more

Gate Valve
Scorpio Valves Suppliers Dealers Distributors in India

Scorpio cast steel valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum   Read more

Forged Steel Gate Valve
Scorpio Valves Suppliers Dealers Distributors in India

Scorpio cast steel valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum   Read more

Swing Check Valve
Scorpio Valves Suppliers Dealers Distributors in India

Scorpio cast steel valves are designed and manufactured to provide maximum service life and dependability. ALL check valves meet the design requirements of American Petroleum   Read more

Wafer Cast Steel Check Valve
Scorpio Valves Suppliers Dealers Distributors in India
Globe Valve
Scorpio Valves Suppliers Dealers Distributors in India

Scorpio cast steel globe valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute    Read more

Butterfly Valve
Scorpio Valves Suppliers Dealers Distributors in India

Scorpio cast steel globe valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute   Read more

Knife Egde Gate Valve
Scorpio Valves Suppliers Dealers Distributors in India

Types of Scorpio Valves ?

Automatic Valve

AUTOMATION VALVES ( Automatic Control Valve )

Pressure Relief Valve – 400
Pressure reducing & surge control valve automatically reduces a higher inlet pressure to a steady lower downstream pressure regardless of flow rate and inlet pressure fluctuations. Pilot valve enables the main valve to close quickly to prevent downstream surges.

ADDITIONAL RELIEF/SUSTAINING FUNCTION-400
401-02 pressure sustaining/differential pressure/check
402-pressure sustaining solenoid on/off valve
403-surge anticipator relief/remote sense
Adjustment range : 0-150 psig
SPECIFICATIONS
Pressure Class : 150 & 300 #
Temperature Range : -40º to 90º C.
Media : Any Liquid Services
Material : Body & Cover : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Pressure Reducing Valve – 500
Pressure reducing & surge control valve automatically reduces a higher inlet pressure to a steady lower downstream pressure regardless of flow rate and inlet pressure fluctuations. Pilot valve enables the main valve to close quickly to prevent downstream surges.

SPECIFICATIONS
Pressure Class : 150 & 300 #
TEMPERATURE RANGE : -40º to 90º C.
Media : Any Liquid Services
Material : Body & Cover : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Max. Inlet Pressure : 300 PSIG
Max. Outlet Pressure : 0 to 150 PSIG

Pressure Reducing/Sustaining Valve – 603
The Series 600 consists of the particular range of pressure reducing valve. The valve's name itself narrates function. The valve automatically reduces a higher inlet pressure to a steady outlet pressure to a steady lower downstream pressure regardless of changing flow parameter and fluctuations in upstream. A solenoid valve is provided to intercept the operation of the pressure reducing control.

SPECIFICATIONS
Pressure Class : 150 & 300 #
Temperature Range : -40º to 90º C.
Media : Any Liquid Services
Material : Body & Cover : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Modulating / Float Valve – 100
The series 100 valves consists of a wide range of float valves. Valves are available for horizontal mounting and vertical mounting. They are designed to controls the level of liquids in open tanks, ponds, basins, and other similar reservoirs. The series consists of 101-modulationg float valve, 102-float on-off globe type valve, 103- float angle type valve.

Additional Relief/Sustaining Function-100
101-Modulating Float Valve
102-Float on/off globe type valve
103-Float on/off angle type valve
Maximum Range : 0-300 psig
Specifications
Globe : 15-80 mm screwed, 50-150 mm Flanged
Angle : 50-100 mm screwed, 100-150 mm flanged.
Pressure Ratings : 150 & 300 #
Temperature Range : -40º to 90º C.
Material : Body & Cover : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Media : Any Liquid Services

Solenoid Control Valve – 700
The 700series solenoid control valve is classified in two categories (1) Globe and (2) Angle type. The valve is a self-contained unit consists of a diaphragm operated main valve with two solenoid pilot valves. The first (globe) will permit main valve to open when de-energized. The solenoid pilot valve may be activated by pressure, temperature, clock, and float. Etc. other features are available on custom basis.

Additional Relief/Sustaining Function-700
701-Solenoid on/off
702-High Capacity
703-Booster Pump Control
704-High capacity with control
Max. Range : 0-300 psig
Specifications
Pressure Ratings : Class: 150-300 #
Standard Materials : 150-400 mm, WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel.
Temperature Range : -40º to 90º C.
Media : Any Liquid Service

Separate Opening/Closing Speed

Controls Check Valve – 800
The 800 series Non-slam check valves are diaphragm actuated. The higher downstream pressure enters the valve cover thru a control tube and the valve closes.

Additional Relief/Sustaining Function-800
801R-No speed control
801-01R-No closing speed
801-02R-Opening speed
801-03R-Separate adjustable opening and closing speed (4" & smallest)
801R-Separated opening and closing speed (6" & large)
Specifications
Pressure Ratings : Class:150-300 #
Standard Materials : Stainless Steel
Size : 150-400 mm
Temperature Range : -40º to 90º C.
Main valve Body & Cover : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Media : Any Liquid Servic

Deluge Valve – 1000
Valve closes when air/hyd./electrical pressure, signal is applied to the cover of control. Valve opens when air/hyd./electrical pressure is relieved from the cover of control. Manual by-pass allows manual opening of the valve. The Scorpio ACV 1000 deluge valve meets all requirements for Indian listed, fire protection service. Valve opens on demand to provide water flow to the fire protection sprinkler system. Pilot system can be hydraulically, pneumatically/electrical signal or manually operated. Opening of valve is by loss of control pressure or by manual opening.

Specifications
Pressure Ratings : Class:150-300 #
Temperature Ranges : -40º to 90º C.
Standard Materials : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
150-400 mm

Safety Relief Valve

Safety Relief Valve C-601

Technical Specification

Inlet Size 1" x 2" through 10" x 12" ANSI Flanged
Material WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Inlet Rating ANSI Class 150# to 2500#
Orifice Size Sizes D Through T
Temperature Range -450º F to 1500º F
Pressure 5 to 6500 PSIG
  • Spring loaded safety relief valve
  • Full lift pop type design
  • Open bonnet with cap & liver
  • Close bonnet with liver
  • Close bonnet with cap
  • Close bonnet with packed liver
  • Metal seat
  • Stallited nozzle & dics
  • Soft seat with PTFE & Viton
  • Bellows seal safety relief valve


Safety Relief Valve P-401

Technical Specification

Size 1" x 2" to 8" x 10"
Body WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim C.S./Alloy Steel
Minimum Pressure 20 PSI
Maximum Pressure 20 PSI
Maximum Pressure 3000 PSI
Temperature 200º C

Operating Advantage :

  • Bubble-tight closer to set pressure : Series 401 valves operate bubble tight at higher pressure to set pressure ratios, allowing operators to run very close to the system's maximum allowable working pressure. While protecting the system from over pressure, series 401 allows maximum product through put, increased system profitability and reduced fugitive emissions.
  • Set pressure and blowdown set at pilot control valve : In line service, settings and blowdown adjustments are completed quickly and easily without main valve intrusion. Subsequent reduction in product loss and fugitive emissions add to system profitability.
  • Typical application : The PSV 401series pilot operated valves are built in conformance to section VIII of the ASME boiler and pressure vessel code for air, gas, vapor and liquid service.

Pilot Operated Safety Relief Valve V-1010

Technical Specification

Size 4x6 / 6x8 / 8x10 / 10x12
Body WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim C.S./Alloy Steel
Minimum Pressure 1 PSI
Maximum Pressure 20 PSI
Temperature 70º C

Low Pressure Relief Valve:

Low pressure system can be protected from over pressure by spring-operated valves. Weight-loaded valves or pilot-operated valves.

Product:

The series 1010 product is a very wide range of both pressure and pressure relief valves. Primarily designed for protecting low pressure storage vessels and tanks as well as low pressure piping systems.

Safety Relief Valve L-2500

Technical Specification

Valve Size 1/2" to 3" NPT/BSP
Pressure Range 0 to 3000 PSIG
Material WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Typical Application :

Built in conformance to ASME code section / API for air, gas, steam and liquid service


Safety Relief Valve HP-8000

Built in conformance to ASME code section / API for air, gas, steam and liquid service Technical Speci

Valve Size 1/4" to 2" NPT/BSP
Pressure Range 0 to 10000 PSIG
Material C.S./CF8/CF8M/Alloy steel flat seats for easy maintenance

Safety Relief Valve Open Bonnet 0 – 601

Inlet Size 1" x 2" through 10" x 12" ANSI Flanged
Material WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Inlet Rating ANSI Class 150# to 2500#
Orifice Size Sizes D Through T
Temperature Range -450º F to 1500º F
Pressure 5 to 3000 PSIG

SPECIFICATIONS

  • Spring loaded safety relief valve
  • Full lift pop type design
  • Open bonnet with cap & liver
  • Close bonnet with liver
  • Close bonnet with packed liver
  • Metal seat
  • Stallited nozzle & dics
  • Soft seat with PTFE & Viton
  • Bellows seal safety relief valve

Control Valve

Control Valve Series 600

BODY SPECIFICATIONS - BODY TYPES - SINGLE PORT AND ANGLE TYPE

parts list

Sizes in Types & Ratings Indicated Inch 1/2 3/4 1 1 1/2 2 3 4 6 8 10
Material Connection Rating mm 15 20 25 40 50 80 100 150 200 250
 
Cast Steel Threaded 300   S S S S S          
Flanged 150   S S S S S S S S    
300   S S S S S S S S    
 
SS and Alloy Steel Threaded and Socket Weld 600   S S SA SA SA          
900-1500   A A A A A          
2500   A A A A A          
 
Flanged 150-300   S S SA SA SA SA SA SA    
600   S S SA SA SA SA SA SA   A
900-1500       A A A A A     A
2500       A A A A        
 
Butt Weld 600             SA SA SA    
900             A A     SA
1500             A A      
2500             A A      

Control Valve Series 700

BODY SPECIFICATIONS - BODY TYPES - SINGLE PORT AND DOUBLE PORT

parts list

Sizes in Types & Ratings Indicated Inch 1/2 3/4 1 1 1/2 2 2 1/2 3 4 6 8 10 12 14 16 20
Material Connection Rating mm 15 20 25 40 50 65 80 100 150 200 250 300 350 400 500
Cast Steel Threaded 300   S-D S-D S-D S-D                      
Flanged 150   S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D      
300   S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D      
Threaded and
Socket Weld
600   S-D S-D S-D S-D S-D                    
900-1500       S-D S-D S-D                    
2500       S-D S-D S-D                    
Flanged 150-300   S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D D D D
600   S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D S-D D D D
900-1500       S-D S-D S-D D S-D S-D S-D S-D D        
2500       S-D S-D S-D   S-D D D D          
SS and
Alloy Steel
Butt Weld 600             S-D S-D S-D S-D S-D S-D S-D S-D D  
900             S-D S-D S-D S-D S-D          
1500             S-D S-D S-D S-D S-D          
2500               S-D                

Control Valve 800

BODY SPECIFICATIONS - BODY TYPES - SINGLE PORT AND THREE WAY

parts list

Sizes in Types & Ratings Indicated Inch 1 1 1/2 2 2 1/2 3 4 6 8
Material Connection Rating mm 25 40 50 65 80 100 150 200
Cast Steel Threaded 300   T T T          
Flanged 150   T T T T T T T T
300   T T T T T T T T
SS and
Alloy Steel
Threaded and
Socket Weld
600   T T T          
900-1500   ST S ST          
2500   ST S ST          
Flanged 150-300                 T
600                 T
900-1500                  
2500   T T T T T T T  

Ball Valve

Scorpio steel ball valves are designed and manufactured to provide maximum service life and dependability. All Ball valves are full ported and meet the design requirements of American Petroleum Institute standard API608 &API 6D. British standard Bs5351 and generally, Conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of body/bonnet materials and trims.

MODIFICATIONS AVAILABLE IN SCORPIO VALVES

  • Trim Changes
  • End Connection Modifications
  • Packing and Gasket Change
  • Operator Mounting
  • Handwheel, Extensions
  • Pressure Equalizing
  • Customer Specified Coatings
  • Weld End Bore Changes
  • Oxygen & Chlorine Clearing & Packaging

OPERATION

Extended lever for easy operation. also available with gearing motor actuators, pneumatic or hydraulic actuators for more difficult services.

BODY & BONNET

Split or 3-piece, split body & bonnet for 12" & small disassembles easily for repair component.

BORE

Full bore or reduced bore. full-bore design provides exceptional flow control.

END CONNECTIONS

A choice of flanged, Rh flanged or butt welding end for piping flexibility.

RANSE OF MATERIAMF

Standard body/bonnet materials include WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel. For special applications they can be supplied in other grades of alloy & stainless steel. There's a full range of trim materials to match any service optional packing & gasket materials are available for a full range of service conditions.

PACKING

Std packing multiple V-Teflon packing combined with live loading, maintains packing compression under high-cycle and severe service applications. Graphite packing is used for high-temperature situation.

BPS

Blow-out proof stem a pressure-safe stem shoulder design that protects against failure under excess pressure.

Fire safe designed to API607 or BS 6755 to grant their operation suitability in case of fire. Secondary metal-to- metal seal acts as backup if primary seal is destroyed by fire. Valves ordered for compliance with API607 will be provided with graphite packing and gaskets.

Floating, cast steel ball valve 150 LB

APPLICABLE STANDARDS

  • Steel Ball Valves API 608/API6D
  • Steel Ball Valves ISO 14313
  • Fire Safe, API 607
  • Steel VaLves ASME B16.34
  • Face To Face ASME B16.10
  • End Flanges ASME B16.5
  • Butt Welding Ends ASME B16.25
  • Inspection And Test API 598/API 6D

DESIGN DESCRIPTIONS

  • Full Port Design
  •  Bolted Bonnet
  • Floating Ball Type
  • Blow-out Proof Stem
  • Fire Durable Construction
  • Anti Static Device
  • Stopper Device
  • ISO 5211 Mounting Pad
  • Ranged Or Butt Welding Ends
  • Available With Bg Operator

MATERIALS OF PARTS

S. No. Part Name Carbon Steel Stainless Steel
1 Body A216-WCB A351-CRIM
2 Bonnet A216-WCB A351-CF8M
3 Ball A182-F304 Al 82-F316
4 Steam A276-304 A276-316
5 Seat Ring R.PTFE
6 Bonnet Gasket Graphite+304 PTFE
7 Bonnet Stud A193-B7 Al 93-B8
8 Bonnet Stud Nut A194-2H A194-8
9 Packing PTFE
10 Gland Flange A216-WCB A351-CF8M
11 Gland Bolt A193-B7 A193-B8
12 Stop Plate Carbon Steel Carbon steel +Zn
13 Handle Carbon steel

DIMENSIONAL DATAS OF ANSI CLASS 150 LB

NPS 1/2 3/4 1 2 3 4 6 8 10 12 in
DN 15 20 25 40 50 65 80 100 150 200 250 300 mm
L 4.25 4.62 5 6.5 7 7.5 8 9 15.5 18 21 24 in
(RF) 108 117 127 165 178 190 203 229 394 457 533 610 mm
L1 5.5 6 6.5 7.5 8.5 9.5 11.12 12 18 20.5 22 25 in
(BW) 140 152 165 190 216 241 283 305 457 521 559 635 mm
H 2.12 2.12 2.75 3.5 4.12 6.12 7.25 8 10 11 13.5 16.5 in
155 55 70 90 105 155 185 205 255 280 345 420 mm
W 5 5 6 8 14 16 20 20 24 32 32 32 in
130 130 160 200 350 400 500 500 600 800 800 800 mm
Wt(kg.) 2.3 3 4.5 7 9.5 15 19 33 93 160 200 280 BW
1.8 2.8 3.7 6.2 8.5 14 21 35 98 170 225 295

Floating, Cast Steel Ball Valve 300 LB/600LB

APPLICABLE STANDARDS

  • Steel Ball Valves API 608/API6D
  • Steel Ball Valves ISO 14313
  • Fire Safe, API 607
  • Steel Valves ASME B16.34
  • Face To Face ASME B16.10
  • End Ranges ASME B16.5
  • Butt Welding Ends ASME B16.25
  • Inspection And Test API 598/API 6D

DESIGN DESCRIPTIONS

  • Full Port Design
  •  Bolted Bonnet
  • Roating Ball Type
  • Blow-out Proof Stem
  • Fire Durable Construction
  • Anti Static
  • Stopper Device
  • ISO 5211 Mounting Pad
  • Ranged Or Butt Welding Ends
  • Available With Bg Operator

MATERIALS OF PARTS

No. Part Name Carbon Steel Stainless Steel
1 Body A216-WCB A351-CF8M
2 Bonnet A216-WCB A351 -CF8M
3 Ball A182-F304 A182-F316
4 Steam A276-304 A276-316
5 Seat Ring R.PTFE
6 Bonnet Gasket Graphite+304 PTFE
7 Bonnet Stud A193-B7 A193-B8
8 Bonnet Stud Nut A194-2H A194-8
9 Packing PTFE
10 Gland Flange A216-WCB A351-CFBM
11 Gland Bolt A193-B7 A193-B8
12 Stop Plate Carbon Steel Carbon steel +Zn
13 Handle Carbon steel

DIMENSIONAL DATAS OF ANSI CLASS 300 LB

N PS 1/2 3/4 1 11/2 2 21/2 3 4 6 8 10 in
DN 15 20 25 40 50 65 80 100 150 200 250 mm
5.5 6 6.5 7.5 8.5 9.5 11.12 12 15.88 19.75 22.38 in
(RF) 140 152 190 190 216 241 283 305 403 502 568 mm
L1 5.5 6 6.5 7.5 8.5 9.5 11.12 12 18 20.5 22 in
(BW) 140 152 165 190 216 241 283 305 457 521 559 mm
H 2.12 2.12 2.75 3.5 4.12 6.12 7.25 8 10 11 13.5 in
55 55 70 90 105 153 187 206 255 280 345 mm
W 5 5 6 8 14 16 20 20 24 32 32 in
130 130 160 200 350 400 500 500 600 800 800 mm
Wt (kg.) 2.3 3 5.5 10.5 14.5 23.5 30 55 118 200 250 BW
1.8 2 3.2 5.5 8.7 15 18 36 85 152 182

DIMENSIONAL DATAS OF ANSI CLASS 600 LB

NPS 1/2 3/4 1 2 3 in
ON 15 20 25 40 50 65 80 mm
L 6.5 7.5 8.5 9.5 11.5 13 14 in
(RF/BW) 165 190 216 241 292 330 356 mm
L2 11.62 13.12 141 2 in
(RTJ) 295 333 359 mm
H 2.38 2.38 3 4 4.75 6.88 8.38 in
61.5 61.5 78 101 120 174 212 mm
W 5 6 8 14 16 20 24 in
130 160 200 350 400 500 600 mm
Wt(kg.) 3.3 4.5 7.2 13.5 19 31 39 BW
2.6 3.1 4.8 6 3 22 27

Trunnion Mounted, Cast Steel Ball Valve 150LB/300LB

DESIGN DESCRIPTIONS

  • Full Port Design
  • Split Body Three Pieces Body for 12 &Above
  • Trunnion Mounted BaU Type
  • Blow-out Proof Stem
  • Fire Durable Construction
  • Anti Static Device
  • Stopper Device
  • Flanged or Butt Welding

APPLICABLE STANDARDS

  • Steel Ball Valves API6D
  • Fire Safe
  • Anti Statics
  • SteeL Valves ASME B16.34
  • Face To Face ASME B16.10
  • End Flanges ASME B16.5
  • Butt Welding Ends ASME B16.25
  • Inspection And Test API 598/API 6D

MATERIALS OF PARTS

No. Part Name Carbon Steel Stainless Steel
1 Body A216-WCB A351-CF8M
2 Bonnet A216-WCB A351-CF8M
3 Ball A182-F304 A182-F316
4 Stem A276-304 A276-316
5 Seat A105+ENP Al 82-F316
6 Seat Insert Glass Filled PTFE
7 Seat Spring A313-304 Inconel X-750
8 Seat 0-Ring NPR Vrton
9 Stem 0-Ring NBR Vrton
10 Bonnet Gasket Graphtte+304 Graphite+316
11 Bonnet 0-Ring NBR Vrton
12 Antistatic Spring A313-304 A313-316
13 Lower Cover A216-WCB A182-F316
14 Bonnet Stud A193-B7 A193-B8
15 Bonnet Stud Nut A194-211 A194-8
16 Trunnion A276-304 A276-316
17 Trunnion Bearing 304+ PTFE 316+ PTFE
18 Gland Range A216-WCB A351-CF8M
19 Gland Mt A193-B7 A193-B8
20 Stop Plate Carbon Steel Carbon Steel +Zn
21 Handle Carbon Steel

DIMENSIONAL DATAS OF ANSI CLASS 150 LB

NPS 2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in
DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 mm
L 7 7.5 8 9.00 15.5 18 21 24 27.00 30.00 34.00 36.00 42.00 45 49 51 54 60 in
(RF) 178 190 203 229 394 457 533 610 686 762 864 914 1067 1143 1245 1295 1372 1524 mm
L1 8.5 9.5 11.12 12.00 18 20.5 22 25 30.00 33.00 36.00 39.00 45.00 49 53 55 60 68 in
(BW) 216 241 283 305 457 521 559 635 762 838 914 991 1143 1245 1346 1397 1524 1727 mm
H 7 7.5 8.25 9.25 20.88 24.62 25.62 30.75 31.00 36.25 38.25 43.38 45.25 50.75 55.12 64.12 70.88 80.75 in
177 190 210 235 530 625 650 780 790 920 970 1100 1150 1290 1400 1630 1840 2050 mm
W 14 16 20 20 24 24 24 24 32 32 32 32 32 32 32 32 32 32 in
350 400 500 500 600 600 600 600 800 800 800 800 800 800 800 800 BOO 800 mm
Wt(kg.) 15 19 27 38 81 140 160 205 260 390 510 750 1200 1400 1860 2100 2530 2970 BW
13.5 15.5 24.5 32.5 76 132 147 182 241 370 495 726 1125 1250 1640 1930 2390 2760

    Gate Valves

    Scorpio cast steel valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute standard API600 & API 6D. British standard BS1414 BS EN 1984 and generally, Conform to American Society of Mechanical Engineers standard ASME B1634. Valves are available in a complete range of body/bonnet materials and trims.

    MODIFICATIONS AVAILABLE IN SCORPIO VALVES

    • Trim Changes
    • End Connection Modifications
    • Packing and Gasket Change
    • Operator Mounting
    • Handwheel, Extensions
    • Pressure Equalizing
    • Customer Specified Coatings
    • Weld End Bore Changes
    • Oxygen & Chlorine Clearing & Packaging

    OPERATION

    Large hand wheels for easy operation. Also available with gearing motor actuators, pneumatic or hydraulic actuators for more difficult services.

    LIVE LOAD PACKING

    In services requiring frequent cycling or with high pressure/temperature variations, live loading extends the service life between maintenance periods by requiring less stments. BelieviU.e springs are employed to provide constant packing gland stress

    WEDGE

    Integral guide rib faces assure self-centering of wedge. flexible wedge gate valve has a one piece. twin-disc wedge, which is designed so that each half flexes independently. Available in solid flex split and his designs.

    OS & Y

    Outside screw and yoke. Cast steel gate valve yoke integral with bonnet for 150 Lb-B" 600 Lb-6" 900 Lb-4" & small Bolted bonnet, Welding bonnet and pressure seal bonnet in services requiring frequent cycling or with high pressure/tempareture variations.

    RANSE OF MATERIAMF

    Standard body/bonnet materials include nine grades of carbon, low alloy & stainless steels. For special applications they can be supplied in other grades of alloy & stainless steel. Threre's a full range of trim materials to match any service optional packing & gasket materials are available for a full range of service conditions.

    END CONNECTIONS

    A choice of flanged, RTJ flanged or butt welding end for piping flexibility.

    LANTERN RING & DOUBLE PACING SET

    Lantern ring leak-off fitting connection & double packing stack is optionally available for critical services.

    YOKE SLEEVE

    Extra long thread engagement between yoke sleeve and stem provide long thread life. Valves of sizes Larger than 150 Lb-12", 300 Lb-10", 600 Lb-6", 900 Lb / 1500 Lb / 4" are regularly provided with roll bearing yokes.

    STEM

    All wedge gate valves are provided with upset forged 1-head stems by forging the T-head. The stem at the stem-wedge connection is strengthened. This design also allows the wedge possibility of a bent stem jamming the wedge.

    BODY TO BONNET JOINT

    A flat face gasket joint is used in the 150lb valves. A male and female joint is used in 300Lb to 600Lb valves. Ring joint is 900Lb & higher rated valves.

    Cast Steel Gate Valve 150LB/300LB

    APPLICABLE STANDARDS

    • Steel Gate Valves API 600/API6D
    • Steel Gate Valves ISO 10434/150 14313
    • Steel Valves Asme B16.34
    • Face To Face ASME B16.10
    • End Flanges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection And Test API 598/API 6D

    DESIGN DESCRIPTIONS

    • Full Port Design
    • Os & y Out Side Srcew And Yoke
    • Bb. Bolted Bonnet
    • Flexible Wedge, Fully Guided
    • Choice Of Solid Or Split Wedge
    • Renewable Seat Rings
    • Forged T-head Stem
    • Rising Stem And Non-rising Hand Wheel
    • Flanged Or Butt Welding Ends
    • Available With Bg Operator

    MATERIALS OF PARTS

    S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-WC6
    2 Bonnet A216-WCB A217-W6
    3 Wedge A216-WCB+CR13 A2174NC6+HF
    4 Stem A182-F6a CR-MO-V
    5 Seat ring A105+CR13 A182-F1+HF
    6 Stem Backseat A276-420 A276-304
    7 Bonnet Gasket Spiral wound (Grapats+304)
    a Bonnet Stud A193-67 A193-616
    9 Bonnet Stud Nut A194-2H A194-7
    10 Packing Graphite
    11 Gland A276-420 A276-304
    12 Gland Flange A216-WCB A217-WG6
    13 Eye Bolt Pin Carbon Steel A276-420
    14 Eye Bolt Carbon Steel A193-B7
    15 Eye Bolt Nut Carbon Steel A194-2H
    16 Grease Frtting Brass + Steel
    17 Yoke Sleeve Aluminium - Bronze
    18 Yoke Sleeve Jam Nut Carbon Steel
    19 Hand Wheel Malleable Iron
    20 Hand Wheel Nut Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 150 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 mm
    7 7.5 8 9 10.5 11.5 13 14 15 16 17 18 20 22 24 24 28 28 in
    (RF) 178 191 203 229 267 292 330 356 381 406 432 457 508 559 610 610 711 711 mm
    L1 85 9.5 11.12 12 15.88 16.5 18 19.75 22.5 24 26 28 32 34 36 36 38 40 in
    (BW) 216 241 283 305 403 419 457 502 572 610 660 711 813 864 914 914 965 1016 mm
    15.25 17 18.88 23 30.5 37.62 54.5 53.12 59.38 67 74.5 83.5 98.25 110.5 116.5 124 129 146.5 in
    (Open) 386 434 480 584 765 956 1149 1350 1508 1703 1892 2119 2500 2806 2960 3150 3280 3720 mm
    Do 8 8 10 12 12 14 16 15 20 22 24 26 29 29 32 32 38 40 in
    200 200 250 300 300 350 400 450 500 550 600 640 700 720 800 800 950 1000 mm
    Wt(kg.) 18 18 32 50 77 121 178 265 463 463 621 792 1521 1521 1838 2261 2490 3310 RF
    15 15 26 41 69 108 156 248 424 424 587 752 1570 1570 1900 3310 2540 3380 BW

    DIMENSIONAL DATAS OF ANSI CLASS 300 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in
    ON 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 mm
    L/L1 8.5 9.5 11.12 12 15.88 16.5 18 19.75 30 33 36 39 45 49 53 55 60 68 in
    (RF/BW) 216 241 283 305 403 419 457 602 762 838 914 991 1143 1245 1346 1397 1524 1727 mm
    L2 9.12 10.12 11.75 12.62 16.5 17.12 18.62 20.39 30.62 33.62 36.62 39.75 45.88 50 54 56 61.12 69.12 in
    (RTJ) 232 257 298 321 419 435 473 518 778 854 930 1010 1165 1270 1372 1422 1553 1756 mm
    16.12 17.88 20 24 31.75 39.38 47.62 55.75 62.25 67.88 77.12 86.38 102 117 122 126 130 152 in
    (Open) 410 453 509 612 805 1000 1210 1415 1580 1725 1960 2195 2590 2975 3100 3200 3300 3860 mm
    Do 8 8 10 12 14 16 18 20 25 22 24 26 29 29 32 32 38 40 in
    200 200 250 300 350 400 450 500 550 550 600 640 720 720 800 800 950 1000 mm
    Mk) 23 35 50 71 144 209 322 482 683 950 1145 1635 2660 3090 3310 3595 3720 3985 RF
    17 26 39 53 113 164 256 390 565 805 965 1410 2305 2540 2725 3055 3360 3630 B

    Cast Steel Gate Valve 600 LB /900 LB

    APPLICABLE STANDARDS

    • Steel Gate Valves API 600/API6D
    • Steel Gate Valves ISO 10434/150 14313
    • Steel Valves Asme B16.34
    • Face To Face ASME B16.10
    • End Flanges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection And Test API 598/API 6D

    DESIGN DESCRIPTIONS

    • Full Port Design
    • 0s4 Out Side Srcew And Yoke
    • Bb. Bolted Bonnet
    • Flexible Wedge, Fully Guided
    • Choice Of Solid Or Split Wedge
    • Renewable Seat Rings
    • Forged T-head Stem
    • Rising Stem And Non-rising Hand Wheel
    • Flanged Or Butt Welding Ends
    • Available With Bg

    MATERIALS OF PARTS

    S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-WC6
    2 Bonnet A216-WCB A21 7-W6
    3 Wedge A216-WCB+CR13 A217-WC6+HF
    4 Stem A182-F6a CR-MO-V
    5 Seat ring Al 05+CR13 A182-F1+HF
    6 Stem Backseat A276-420 A276-304
    7 Bonnet Gasket Spiral wound (Graphtle+304)
    8 Bonnet Stud A193-87 A193-B16
    9 Bonnet Stud Nut A194-2H A194-7
    10 Packing Graphite
    11 Gland A276-420 A276-304
    12 Gland Flange A216-WCB A217-WC6
    13 Eye Bolt Pin Carbon Steel A276-420
    14 Eye BoR Carbon Steel A193-87
    15 Eye Boll Nut Carbon Steel A194-2H
    16 Grease Fitting Brass + Steel
    17 Yoke Sleeve Aluminium - Bronze
    18 Yoke Sleeve Jam Nut Carbon Steel
    19 Hand Wheel Malleable Iron
    20 Hand Wheel Nut Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 600 LB

    NPS 2 2/1/2002 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in
    ON 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 MM
    L/L1 11.5 13 14 17 22 26 31 33 35 39 43 47 55 57 61 65 70 82 in
    (RF/BW) 292 330 359 432 559 660 787 838 889 991 1092 1194 1397 14.48 1549 1651 1778 2083 mm
    L2 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 57.5 61.5 65.5 70.62 82.62 in
    (RTJ) 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1461 1562 1644 1794 2099 mm
    H 16.5 18.75 20.38 25.5 33 40.38 48.38 57 62 70.62 76 87 101.5 105 109.5 140 124 140 in
    (Open) 418 476 518 646 840 1025 12.3 1450 1575 1795 1930 2210 2580 2665 2780 2895 3150 3560 rnal
    Do 8 10 10 12 18 20 24 24 24 24 26 26 29 29 32 32 38 40 in
    200 250 250 300 450 500 600 600 600 600 640 640 720 720 800 800 950 1000 mm
    Wt(kg.) 36 52 67 112 170 393 610 890 1245 1530 1945 2450 2995 3475 3725 4045 4185 4480 RF
    29 42 53 83 125 310 472 730 1055 1240 1625 2030 2590 2855 3065 3440 3780 4085 BW

    DIMENSIONAL DATAS OF ANSI CLASS 900 LB

    N PS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 mm
    L/L1 14.5 16.5 15 18 24 29 33 38 40.5 44.5 48 52 61 in
    (RF/BW) 368 419 381 457 610 737 838 737 1029 1130 1219 1321 1549 mm
    L2 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 in
    (RTJ) 371 422 384 460 613 740 841 968 1038 1140 1232 1334 1568 mm
    H 19.62 21.5 22.5 26.62 35.5 4.5 53 60 74.88 81 87 101 104 in
    (Open) 498 547 573 678 900 1103 1345 15.25 1900 2055 2215 2565 264 mm
    Do 10 10 12 18 20 24 26 29 32 32 38 38 40 in
    250 250 300 450 500 600 640 720 800 800 950 950 100 mm
    Wt(kg.) 74 131 101 172 335 640 1100 1600 2250 2850 3060 3935 49 RF
    54 105 78 135 260 515 920 1380 2010 2565 3485 3250 4065 BW

    Cast Steel Gate Valve 1500 LB /2500 LB

    DESIGN DESCRIPTIONS

    • Steel Gate Valves API 600/API6D
    • Steel Gate Valves ISO 10434/150 14313
    • Steel Valves Asme B16.34
    • Face To Face ASME B16.10
    • End Ranges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection And Test API 598/API 6D

    APPLICABLE STANDARDS

    • Full Port Design
    • Os&y Out Side Srcew And Yoke
    • BB. Bolted Bonnet
    • Flexible Wedge, Fully Guided
    • Choice Of Solid Or Split Wedge
    • Renewable Seat Rings
    • Forged 1-head Stem
    • Rising Stem And Non-rising Hand Wheel
    • Flanged Or Butt Welding Ends
    • Available With Bg Op

    MATERIALS OF PARTS

    S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-W06
    2 Yoke A216-WCB A217-WC6
    3 Wedge A216-WCB+HF A217-WC6+HF
    4 Stem A182-F6a CR-MO-V
    5 Seat ring A105+HF A182-F11+HF
    6 Bonnet A105 A182-F11
    7 Bonnet Gasket Steel Ring 3045S ring
    8 Adapter ring Carbon Steel A-276-420
    9 Retainer Carbon Steel A-276-420
    10 Yoke Cap Carbon Steel Alloy Steel
    11 Bonnet Stud A193-B7 A193-B16
    12 Bonnet Stud Nut A194-2H A194-7
    13 Packing Graphite
    14 Gland A276-420 A276-304
    15 Gland Flange A216-WCB A217-WC6
    16 Eye Bolt Pin Carbon Steel 4276-420
    17 Eye Belt Carbon Steel A193-B7
    18 Eye Bolt Net Carbon Steel A194-2H
    19 Grease Fitting Brass + Steel
    20 Yoke Sleeve Aluminium-Bronze
    21 Yoke Sleeve Jam Nut Carbon Steel
    22 Hand Wheel Malleable Iron
    23 Hand Wheel Nut Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 150 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 mm
    L/L1 14.5 16.5 18.5 21.5 27.75 32.75 39 44.5 49.5 54.5 60.5 65.5 76.5 in
    (RF/BW) 368 419 470 546 705 832 991 1130 1257 1384 1537 1664 19.43 mm
    L2 15.5 16.62 18.62 21.62 28 33.12 39.38 45.12 50.25 55.38 61.38 66.37 76.62 in
    (RTJ) 371 422 473 549 711 841 1000 1146 1276 1407 1559 1686 1972 mm
    H 24.25 26 30 34.12 39.5 45 54 61 74.88 80.5 93.75 101.5 114.75 in
    (Open) 615 658 760 868 1005 1145 1370 1 550 1900 2050 2380 2580 2915 mm
    Do 10 12 18 20 24 18 18 24 24 24 24 24 24 in
    Wt(kg.) 250 300 450 500 600 460 460 600 600 600 600 600 600 mm
    116 166 209 296 510 920 1910 3145 4100 6200 8965 13100 15860 RF
    105 150 188 265 420 760 1640 2755 3200 5300 8070 11790 14275 BW

    DIMENSIONAL DATAS OF ANSI CLASS 300 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 mm
    L/L1 17.5 20 22.75 26.5 36 40.25 50 56 in
    (RF/BW) 451 508 578 673 914 1022 1270 1422 mm
    L2 17.88 20.5 23 26.88 36.5 40.88 50.88 56.88 in
    (RTJ) 454 514 584 584 683 927 1038 1292 1445 mm
    H 24.88 29 35 41.5 57 63.37 81.75 89.75 in
    (Open) 631 736 890 1055 1450 1610 2075 2280 mm
    Do 12 18 20 20 24 24 24 24 in
    Wt(kg.) 300 450 500 500 600 600 600 600 mm
    155 210 310 580 1 600 2450 4570 7150 RF
    124 160 245 460 1310 2010 3800 6000 BW

    Forged Steel Gate Valve

    APPLICABLE STANDARDS

    • Steel Gate Valves API602
    • Steel Valves ASME B16.34
    • Face To Face, Manufacturer Standard
    • Face To Face, Flanges, ASME B16.10
    • End Flanges ASME B16.5
    • Butt Welding Ends ASM E B16.25
    • Socket-welding Ends, ASME B16.11
    • Screwed Ends ASME B1.20.1
    • Inspection And Test API 598

    OPERATION

    • Outside ScrewAnd Yoke (OS&Y)
    • Bolted Bonnet
    • Choice OfWB, Welded Bonnet
    • Single Wedge, Fully Guided
    • Renewable Seat Rings
    • Yoke Integral With Bonnet
    • Rising Stem And Non-rising Hand Wheel
    • SW, Screwed Ends
    • BW, Butt Welding Ends
    • Flanged Ends

    MATERIALS OF PARTS

    No. Part Name Carbon Steel  ASTM Material 1/1/4cr-1/2 mo 11/4cr-1/2 mo-si
    1 Body A105 A182-F316 A182-F11
    2 Bonnet A105 A182-F316 A182-F11
    3 Wedge Al 82-F6a A182-F316 A182-F6a+HF
    4 Stem A276-410 A276-316 A276-410
    5 Stem Ring A276-410 A182-316 A276-410+ H F
    6 Bonnet Gasket Graphite+304 Graphite+316 G rap hite+304
    7 Bonnet Stud A193-B7 A193-B8M A193-B16
    a Packing Graphite
    9 Gland A276-410 A276-316 A276-410
    10 Gland Flange A105 A182-F316 A182-F11
    11 Eye Boit Pin A276-410 A276-316 A276-410
    12 Eye Boit A193-B7 A193-B8M A193-B16
    13 Eye Bolt Nut A194-2H Al 94-8M A194-2H
    14 Yoke Sleeve A276-410
    15 Hand Wheel Malleable Iron
    16 Hand Wheel Nut Carbon Steel

    DIMENSIONAL DATAS OF 150LB / 300LB / 4300LB

    NPS DN UNIT L1" L (Flanged Ends) D SW SC H (Open) DO Wt2 (kg)
    150LB 300LB 600LB D B NTP S
    3/8 in 3.12 4 5.5 6.5 0.394 0.693 0.378 3/8 0.54 6 4 4.5/4
    10 mm 79 102 140 165 10 17.6 9.6 13/6 151 100
    ½ in 3.12 4.25 5.5 6.5 0.394 0.858 0.78 1/2 0.535 6 4 5.1/4
    15 mm 79 108 140 165 10 21.8 9.6 13/6 151 100
    3/4 in 3.62 4.62 6 7.5 0.531 1.067 0.5 3/4 547 6.25 4 8.2/4.3
    20 mm 92 117 152 190 13.5 27.1 12.7 13/9 158 100
    1 in 4.38 5 6.5 8.5 0.709 1.331 0.5 1 0.681 7.25 5 10.5/6.6
    25 mm 111 127 165 216 18 33.8 12.7 17.3 185 125
    11/4 in 4.75 5.5 7 9 0.945 1.677 0.5 11/4 0.709 9.38 6.25 12.4/9.5
    32 mm 120 140 178 229 24 42.6 12.7 18 18 160
    11/2 in 4.75 6.5 7.5 9.5 1.181 1.917 0.5 11/2 0.724 9.5 6.25 20.1/11
    40 mm 120 165 190 241 30 48.7 12.7 18.4 243 160
    2 in 5.5 7 8.5 11.5 1.437 2.406 0.626 2 0.756 11 7 28/14.5
    50 mm 140 178 216 292 36.5 61.1 15.9 19.2 279 18

    Forged Steel Gate Valve 900LB/ 1500 LB

    APPLICABLE STANDARDS

    • Steel Gate Valves API 602
    • Steel Valves ASME B16.34
    • Face To Face, Manufacturer Standard
    • Face To Face, Ranges, ASME B16.10
    • End Ranges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Socket-welding Ends, ASME B16.11
    • Screwed Ends ASME B1.20.1
    • Inspection And Test API 598

    DESIGN DESCRIPTIONS

    • Outside Screw And Yoke (OS&Y)
    • Bolted Bonnet
    • Choice Of WB, WeLded Bonnet
    • Single Wedge, Fully Guided
    • Renewable Seat Rings
    • Yoke Integral With Bonnet
    • Rising Stem And Non-rising Hand Wheel
    • SW, Screwed Ends
    • BW, Butt Welding Ends
    • Flanged Ends

    MATERIALS OF PARTS

    No. Part Name Carbon Steel  ASTM Material 1/1/4cr-1/2 mo 11/4cr-1/2 mo-si
    1 Body. A105 A182-F316 A182-i1
    2 Bonnet A105 A182-F316 A182-F11
    3 Wedge A182-F6a A182-F316 A182-F6a+HF
    4 Stem A276-410 A276-316 A276-410
    5 Stem Ring A276-410 A182-316 A276-410+HF
    6 Bonnet Gasket Graphtte+304 Graphite+316 Graphite+304
    7 Bonnet Stud A193-B7 A193-B8M A193-B16
    8 Packing Graphite
    9 Gland A278-410 A276-316 A276-410
    10 Gland Flange A105 A182-F316 A182-F11
    11 Eye Bott Pin A276-410 A276-316 A276-410
    12 Eye Bolt A193-B7 A193-B8M A193-B16
    13 Eye Bolt Nut A194-2H A194-8M A194-2H
    14 Yoke Sleeve A276-410
    15 Hand Wheel Malleable Iron
    16 Hand Wheel Nut Carbon Steel

    DIMENSIONAL DATAS OF 900LB / 1500LB

    NPS DN L1" H (Open) W Wt2
    Conv. Full Bolted Welded
    900LB 3/8 95 169 100 2.5 2.4
    ½ 3/8 111 197 125 4.3 4.2
    3/4 ½ 111 197 125 4.2 4
    1 3/4 120 236 160 6.6 6.3
    1500LB 11/4 1 120 246 160 8.8 8.7
    11/2 11/4 140 283 180 12.5 12.1
    2 11/2 178 330 200 17.2 17.2
    2 210 354 240 23.5 22

    Swing Check Valve

    Scorpio cast steel valves are designed and manufactured to provide maximum service life and dependability. ALL check valves meet the design requirements of American Petroleum Institute standard API600 & API 6D. BS EN 13709 and generally, Conform to American Society of Mechanical Engineers standard ASME B16.34. VaLves are available in a compLete range of body/bonnet materials and trims.

    MODIFICATIONS AVAILABLE IN SCORPIO VALVES

    • Trim Changes
    • End Connection Modifications
    • Packing and Gasket Change
    • Operator Mounting
    • Handwheel Extensions
    • Pressure Equalizing
    • Customer Specified Coatings
    • Weld End Bore Changes
    • Oxygen & Chlorine Clearing & Packaging

    EYEBOLT

    For 150Lb-8', 300Lb-8" 600Lb-6" • 900Lb-1500Lb/2500Lb-4"& over. Bolted cover.

    BC

    Welded cover & Pressure seal bonnet in services requiring frequent cycling or with high pressure/term perature variations.

    END CONNECTION

    A choice of flanged, WO flanged or butt welding end for piping flexibiLity.

    BODY TO COVER JOINT

    A male & female joint or tongue and groove joint is used 150Lb to 600Lb valves. Ring joint is used in the body to cover connection in 900Lb & higher rated valves.

    RANGE OF MATERIALS

    Standard body/bonnet materials include nine grades of carbon, low alloy & stainless steels. For special applications they can be supplied in other grades of alloy & stainless steeL Threre's a full range of trim materials to match any service optional packing S, gasket materiaLs are available for a fulL range of service conditions.

    OUTSIDE LEVER B WEIGH

    All external hinge pin swing check valves 12" & smaller are available with an optional outside lever and weight, internal hinge available with all swing check valves.

    SEAT RIGN

    Separate heavy duty fulL ported rings for easy maintenance, Screwed or welded connection into body.

    HCU WEIGHTED MECHANICAL ACCUMULATOR

    This design can be used to either dampen or assist closing of the check valve disc depending on orientation. by using the hydraulic controL unit to buffer action the disc, the vaLve opens at lower flow rates.

    Swing , Cast Steel Check Valve 150LB/300LB

    APPLICABLE STANDARDS

    • Steel Check Valves API 6D
    • Steel Check Valves ISO 14313
    • Steel Valves ASME 81634
    • Face To Face ASME B16.10
    • End Flanges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection and Test API 598/API 6D

    DESIGN DESCRIPTIONS

    • Bc, Bolted Cover
    • Swing Type, Anti-rotation Disc
    • Renewable Seat Rings
    • Non-penetrate Disc Shaft
    • Horizontal Or Vertical Service
    • Flanged Or Butt Welding Ends

    Materials Of Parts

    S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-WC6
    2 Cover A216-WCB A217-WC6
    3 Disc 1 Al 05-CR13 Al 82-F1 1 +HF
    4 Hinge A216-WCB A217-WC6
    5 Fork Part A216-WCB P21 7-W6
    6 Seat Ring A105+CR13 Al 82-F11 +HF
    7 Hinge Pin A276-420 A276-304
    8 Disc Washer Carbon Steel A276-304
    9 Disc Nut Carbon Steel A194-7
    10 Disc Nut Pln Carbon Steel A276-420
    11 Gasket Spiral wound (Graphite+304)
    12 Stud A193-B7 A193-B18
    13 Stud Nut A194-2H A194-7
    14 Eye Bolt 2 Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 150 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 36 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 900 mm
    L/L1 8 8.5 9.5 11.5 14 19.5 24.5 27.5 31 34 38.5 38.5 51 51 57 60 77 in
    (RF/BW) 203 216 241 292 356 495 622 966 787 864 978 978 1295 1295 1448 1524 1956 mm
    L2 8.5 9 10 12 14.5 20 25 28 31.5 34.5 39 39 51.5 in
    (RTJ) 216 229 254 305 368 508 635 711 800 876 991 991 1308 mm
    H 6 6.5 6.88 8 11.5 13.88 15.38 17 18.75 20.62 22.88 24.62 34.75 37 37 38.62 48 in
    152 165 175 204 293 353 390 432 475 525 582 627 883 940 940 980 1220 mm
    Wt(kg.) 14 20 25 40 71 118 177 263 353 542 632 855 970 1600 1600 1990 2760 RF/RTJ
    10 12 17 29 57 96 143 227 295 468 552 755 831 1420 1420 1760 2230 BW

    DIMENSIONAL DATAS OF ANSI CLASS 300 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 36 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 900 mm
    L/L1 10.5 11.5 12.5 14 17.5 21 24.5 28 33.00 34.00 38.5 40 53 53 59 62.75 82 in
    (F1F/BW) 267 292 318 356 445 533 622 711 838 864 978 1016 1346 1346 1499 1594 2083 mm
    L2 11.12 12.12 13.12 14.62 18.12 21.62 25.12 28.62 33.62 34.62 39.12 40.75 53.88 54 60 63.75 in
    (RTJ) 283 308 333 371 460 549 638 727 854 879 949 1035 1368 1372 1524 1619 mm
    H 6 6.5 6.88 8 11.5 13.88 15.38 17 18.75 20.62 22.88 24.62 34.75 35.88 37 38.62 48 in
    152 165 175 204 992 353 390 432 475 525 582 627 883 910 940 980 1220 mm
    VVt(kg.) 16 23 29 46 82 136 204 302 405 625 730 985 1115 1465 1840 2290 3180 RF/RTJ
    11 13 18 31 61 103 155 245 315 503 593 812 895 1205 1525 1895 2395 BW

    Cast Steel Gate Valve 600 LB /900 LB

    APPLICABLE STANDARDS

    • Steel Gate Valves API 600/API6D
    • Steel Gate Valves ISO 10434/150 14313
    • Steel Valves Asme B16.34
    • Face To Face ASME B16.10
    • End Flanges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection And Test API 598/API 6D

    DESIGN DESCRIPTIONS

    • Full Port Design
    • 0s4 Out Side Srcew And Yoke
    • Bb. Bolted Bonnet
    • Flexible Wedge, Fully Guided
    • Choice Of Solid Or Split Wedge
    • Renewable Seat Rings
    • Forged T-head Stem
    • Rising Stem And Non-rising Hand Wheel
    • Flanged Or Butt Welding Ends
    • Available With Bg Operator

    MATERIALS OF PARTS

    S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-WC6
    2 Bonnet A216-WCB A21 7-W6
    3 Wedge A216-WCB+CR13 A217-WC6+HF
    4 Stem A182-F6a CR-MO-V
    5 Seat ring Al 05+CR13 A182-F1+HF
    6 Stem Backseat A276-420 A276-304
    7 Bonnet Gasket Spiral wound (Graphtle+304)
    8 Bonnet Stud A193-87 A193-B16
    9 Bonnet Stud Nut A194-2H A194-7
    10 Packing Graphite
    11 Gland A276-420 A276-304
    12 Gland Flange A216-WCB A217-WC6
    13 Eye Bolt Pin Carbon Steel A276-420
    14 Eye BoR Carbon Steel A193-87
    15 Eye Boll Nut Carbon Steel A194-2H
    16 Grease Fitting Brass + Steel
    17 Yoke Sleeve Aluminium - Bronze
    18 Yoke Sleeve Jam Nut Carbon Steel
    19 Hand Wheel Malleable Iron
    20 Hand Wheel Nut Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 600 LB

    NPS 2 2/1/2002 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in
    ON 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 MM
    L/L1 11.5 13 14 17 22 26 31 33 35 39 43 47 55 57 61 65 70 82 in
    (RF/BW) 292 330 359 432 559 660 787 838 889 991 1092 1194 1397 14.48 1549 1651 1778 2083 mm
    L2 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 57.5 61.5 65.5 70.62 82.62 in
    (RTJ) 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1461 1562 1644 1794 2099 mm
    H 16.5 18.75 20.38 25.5 33 40.38 48.38 57 62 70.62 76 87 101.5 105 109.5 140 124 140 in
    (Open) 418 476 518 646 840 1025 12.3 1450 1575 1795 1930 2210 2580 2665 2780 2895 3150 3560 rnal
    Do 8 10 10 12 18 20 24 24 24 24 26 26 29 29 32 32 38 40 in
    200 250 250 300 450 500 600 600 600 600 640 640 720 720 800 800 950 1000 mm
    Wt(kg.) 36 52 67 112 170 393 610 890 1245 1530 1945 2450 2995 3475 3725 4045 4185 4480 RF
    29 42 53 83 125 310 472 730 1055 1240 1625 2030 2590 2855 3065 3440 3780 4085 BW

    DIMENSIONAL DATAS OF ANSI CLASS 900 LB

    N PS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 mm
    L/L1 14.5 16.5 15 18 24 29 33 38 40.5 44.5 48 52 61 in
    (RF/BW) 368 419 381 457 610 737 838 737 1029 1130 1219 1321 1549 mm
    L2 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 44.88 48.5 52.5 61.75 in
    (RTJ) 371 422 384 460 613 740 841 968 1038 1140 1232 1334 1568 mm
    H 19.62 21.5 22.5 26.62 35.5 4.5 53 60 74.88 81 87 101 104 in
    (Open) 498 547 573 678 900 1103 1345 15.25 1900 2055 2215 2565 264 mm
    Do 10 10 12 18 20 24 26 29 32 32 38 38 40 in
    250 250 300 450 500 600 640 720 800 800 950 950 100 mm
    Wt(kg.) 74 131 101 172 335 640 1100 1600 2250 2850 3060 3935 49 RF
    54 105 78 135 260 515 920 1380 2010 2565 3485 3250 4065 BW

    Swing , Cast Steel Check Valve 1500 LB /2500 LB

    APPLICABLE STANDARDS

    • Steel Check Valves API 6D
    • Steel Gate Valves ISO 10434/150 14313
    • Steel Valves Asme B16.34
    • Face To Face ASME B16.10
    • End Ranges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection And Test API 598/API 6D

    DESIGN DESCRIPTIONS

    • BC, Bolted Cover
    • Swing Type, Anti-rotation Disc
    • Renewable Seat Rings
    • Non-penetrate Disc Shaft
    • Horizontal Or Vertical Service
    • Ranged Or Butt Welding Ends

    MATERIALS OF PARTS

    No. Part Name Carbon Steel  ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-W06
    2 Pres. Seal Bonner A216-WCB A217-WC6
    3 Disc Al 05-HF A182-Fl1+HF
    4 Hinge A2113-WCB A217-W6
    5 Seat Ring Al 05-HF A182-F11+HF
    6 Hinge Pin Steel Ring A276-304
    7 Bonnet Gasket A276-420 30485 Ring
    8 Adapter Ring Carbon Steel A276-420
    9 Retainer Carbon Steel A276-420
    10 Cover Carbon Steel Alloy Steel
    11 Bonnet Stud A193-B7 A193-B7
    12 A194-2H A194-2H A194-2H
    13 Eye Bolt Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 1500 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 in
    DN 50 65 80 100 150 200 250 300 350 400 mm
    L/L1 14.5 16.5 18.5 21.5 27.15 32.75 39 44.5 49.5 54.5 in
    (RF/BW) 368 419 470 546 705 832 991 1130 1257 1384 mm
    L2 14.62 16.62 18.62 21.62 28 33.12 39.38 45.12 50.25 55.38 in
    (RTJ) 371 422 473 549 711 841 1000 1146 1276 1407 mm
    H 9.5 10 13 14.75 18.88 23.5 26 29.12 30.88 32.88 in
    240 256 330 375 480 595 660 740 785 835 mm
    Wt(kg.) 40 63 70 115 250 470 740 1100 1410 1600 RF/RTJ
    29 47 49 84 152 310 470 710 910 1100 BW

    DIMENSIONAL DATAS OF ANSI CLASS 2500 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 in
    DN 50 65 80 100 150 200 250 300 350 400 mm
    L/L1 17.75 20 22.75 26.5 36 40.25 50 56 in
    (RF/BW) 451 508 578 673 914 1022 1270 1422 mm
    L2 17.88 20.25 23 26.88 36.5 40.88 50.88 56.88 in
    (RTJ) 454 514 584 683 927 1038 1292 1445 mm
    H 17.75 13.25 13.75 15.12 19.5 24.62 28 35.62 in
    275 335 350 385 495 625 712 905 mm
    Wt(kg.) 50 76 85 165 460 900 1300 1800 RF/RTJ
    35 55 68 115 225 580 860 1150 BW

    Wafer Cast Steel Check Valve

    APPLICABLE STANDARDS

    • Steel Check Valves API 594/API 6D
    • Steel Check Valves ISO 14313
    • Steel Valves ASME B16.34
    • Face To Face ASME B16.10
    • End Flanges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection and Test API 598/API 6D

    DESIGN DESCRIPTIONS

    • One Piece Body
    • Renewable Split Disc
    • Horizontal Or Vertical Service
    • Wafer Ends
    • Available With Flanged Ends

    RANGE OF MATERIALS

    S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo Low Temp Carbon Steel
    1 Body A216-WCB A351-CF8M A352-LCB
    2 Plate A216-WCB+CR13 A351-CF8M+HF A350-LCB+CR13
    3 Stop Pin A276-420 A278-304 A276-420
    4 Back Spring A313-304 A313-316 A313-304
    5 Hinge Pin A276-420 A276-304 A276-420
    6 Eye Bolt2 Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 150 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 in
    DN 60 65 80 100 150 200 250 300 350 400 450 500 600 mm
    L 2.38 2.62 2.88 2.88 3.88 5 5.75 7.12 7.25 7.5 8 8.62 8.75 in
    60 67 73 73 98 127 146 181 184 191 203 219 222 mm
    D 4 4.88 5.38 6.75 8.62 10.88 13.25 16 17.62 20.12 21.5 23.75 28.12 in
    103 122 135 173 220 277 337 407 488 512 547 604 715 mm
    d 2 2.5 3.25 4 6 8 10 12 13.75 15.75 17.75 19.75 23.62 in
    51 65 80 102 152 203 254 305 350 400 450 500 600 mm
    D1 2.25 2.88 3.5 4.25 6.25 8.25 10.5 12.12 14 16 18 19.88 23.75 in
    56 73 88 108 160 210 266 310 355 405 455 505 605 mm
    Wt. 2 3 4 6 13 25 39 54 80 117 138 163 331 kg.

    DIMENSIONAL DATAS OF ANSI CLASS 300 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 in
    DN 50 65 80 100 150 200 250 300 350 400 450 500 600 mm
    L 2.38 2.62 2.88 2.88 3.88 5 5.75 7.12 8.75 9.12 10.38 11.5 12.5 in
    60 67 73 73 98 127 146 181 222 232 264 292 318 mm
    D 4.25 5 5.75 7 9.88 12 14.12 16.5 19 21.12 30.38 25.62 30.38 in
    110 128 147 179 249 305 359 420 483 537 594 652 772 mm
    d 2 2.5 3 4 6 8 10 1200 14 16 18 20 24 in
    51 65 80 102 152 8.25 254 305 350 400 450 500 600 min
    D1 2.25 2.88 3.5 4.25 6.38 203 10.5 12.25 14 16 18 20 24 in
    58 73 88 108 160 210 266 310 355 405 455 505 608 mm
    Wt. 3 4 6 8 18 31 51 77 117 190 200 265 410 kg.

    Swing , Cast Steel Check Valve 150LB/300LB

    APPLICABLE STANDARDS

    • Steel Check Valves API 594/API 6D
    • Steel Check Valves ISO 14313
    • Steel Valves ASME B16.34
    • IN Face To Face ASME B16.10
    • End Flanges ASME B16.5
    • ButtWelding Ends ASME B16.25
    • Inspection and Test API 598/API 6D

    DESIGN DESCRIPTIONS

    • One Piece Body
    • Butterfly Swing Type
    • Dual-plate Disc, Long-pattern
    • Renewable Split Disc
    • Horizontal Or Vertical Service
    • Wafer Ends
    • Available With Flanged Ends

    MATERIALS OF PARTS

    S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo Low Temp Carbon Steel
    1 Body A216-WCB A351-CF8M A352-LCB
    2 Plate A216-WCB+CR13 A351-CF8M+HF A350-LCB+CR13
    3 Stop Pin A276-420 A276-304 A276-420
    4 Back Spring A313-304 A313-316 A313-304
    5 Hinge Pin A276-420 A276-304 A276420
    6 Eye Bolt2 Carbon Steel

    DIMENSIONAL DATAS OF ANSI CLASS 150 LB

    NPS 2 2/1/2 3 0.4 6 10 12 14 16 in
    DN 50 65 80 100 150 200 250 300 350 400 mm
    L 2.38 2.62 2.88 3.12 5.38 6.5 8.38 9 10.75 12 in
    60 67 73 79 137 165 213 229 273 305 mm
    D 4.38 5 5.75 7.5 10.38 12.5 15.62 17.88 19.25 22.12 in
    110 128 147 191 264 318 398 455 490 562 mm
    d 2 2.5 3 4 6 7.88 9.88 12 13.25 15.25 in
    51 65 80 102 152 200 250 305 337 387 mm
    D1 2.25 2.88 3.5 4.25 6.38 8.38 10.5 12.25 14 157.75 in
    58 73 88 108 162 212 266 312 355 405 nun
    Wt 4 5 8 11 26 55 95 140 223 360 kg.

    DIMENSIONAL DATAS OF ANSI CLASS 300 LB

    NPS 2 2/1/2 3 4 6 8 10 12 14 16 in
    DN 50 65 80 100 150 200 250 300 350 400 mm
    L 2.75 3.25 3.25 4 6.25 8.12 9.5 11.5 in
    70 83 83 102 159 206 241 292 mm
    D 5.5 6.38 6.5 8 11.25 14 17 19.5 in
    140 162 165 204 286 356 432 495 mm
    d 2 2.5 3 4 6 7.88 9.88 12 in
    51 62 80 102 152 200 250 305 mm
    D1 2.25 2.88 3.5 4.25 6.38 8.38 10.5 12.25 in
    58 73 88 108 162 212 266 312 mm
    Wt 8 11 14 20 42 84 145 220 kg.

    Globe Valve

    Scorpio cast steel globe valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute standard API600 & 6D BS EN 13709 and generally, Conform to American Society of Mechanical Engineers standard ASME B1634. Valves are available in a complete range of body/bonnet materials and trims.

    MODIFICATIONS AVAILABLE IN SCORPIO VALVES

    • Trim Changes
    • End Connection Modifications
    • Packing and Gasket Change
    • Operator Mounting
    • Handwheel Extensions
    • Pressure Equalizing
    • By-Pass
    • Customer Specified Coatings
    • Weld End Bore Changes
    • Oxygen & Chlorine Clearing & Packaging

    OPERATION

    Large hand wheels for easy operation. also available with gearing motor actuators, pneumatic or hydraulic actuators for more difficult services.

    LIVE LOAD PACKING

    In services requiring frequent cycling or with high pressure/temperature variations, live loading extends the service life between maintenance periods by requiring less statements. Belleville springs are employed to provide constant packing gland stress.

    YOKE SLEEVE

    Furnished in aluminum bronze to reduce operating torque. Most size furnished with ball bearing yoke sleeves.

    LANTERN RING & DOUBLE PACKING SET

    Lantern ring leak-off frtting connection & double packing stack is optionally available for critical services.

    SEAT RINGS

    Separate heavy duty, full ported rings for easy maintenance. Screwed or welded connection into body.

    RANGE OF MATERIALS

    Standard body/bonnet materials include nine grades of carbon, low alloy & stainless steels. For special applications they can be supplied in other grades of alloy& stainless steeL Threre's a full range of trim materials to match any service optional packing & gasket materials are available for a full range of service conditions.

    OS & Y

    Outside screw and yoke. Cast steel gate valve yoke integral with bonnet for 1O& smalL

    BB

    Bolted bonnet Welding bonnet and pressure seal bonnet in services requiring frequent cycling or with high pressure/tempareture variations.

    END CONNECTIONS

    A choice of flanged, RTJ flanged or butt welding end for piping flexibility.

    BODY TO BONNET JOINT

    A flat face gasket joint is used in the 150lb to 600Lb valves. Ring joint is used in the body to bennet connection in 900lb & higher rated valves.

    DISC

    All Plug disc is stem guided on all size. Disc has a differential angle front the seat to provide a line contact for maximum sealing. The bottom of V-port disc is feuded by the body seat ring for maximum disc stability in throttling applications. the soft teflon ring is excellent for lower temperature service where tight shut off required.

    Cast steel Globe valve 150 LB /300 LB

    APPLICABLE STANDARDS

    • Steel Globe Valves BS EN 13709/API600
    • Steel Valves ASME B16.34
    • Face To Face ASME B16.10
    • End Ranges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection And Test API 598

    DESIGN DESCRIPTIONS

    • Straight Pattern Body Design
    • OS & Y Out Side Screw and Yoke
    • Bb, Bolted Bonnet
    • Yoke Integral With Bonnet
    • Rising Stern And Hand Wheel
    • Loose Disc, Choice Of Plug Or Ball
    • Renewable Seat Ring
    • Impact Hand Wheel For 10" & Above
    • Horizontal Service
    • Ranged Or Butt Welding Ends
    • Available With BG Operator

    MATERIALS OF PARTS

    No. Part Name Carbon Steel  ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-WC6
    2 Bonnet A216-WCB A217-WC6
    3 Disc A105+CR13 A217-F1+HF
    4 Stem Al 82-F6a CR-MO-V
    5 Seat Ring A105+HF A182-F11+HF
    6 Stem Backseat A276-420 A276-304
    7 Bonnet Gasket Steel Ring 304SS ring
    8 Bonnet Stud A193-B7 A193-B16
    9 Bonnet Stud Nut A194-2H A194-7
    10 Packing Graphtte
    11 Gland A276-420 A276-304
    12 Gland Flange A216-WCB A217-W06
    13 Eye Bolt Pin Carbon Steel A276-420
    14 Eye Bolt Carbon Steel A193-B7
    15 Eye Bott Nut Carbon Steel A194-2H
    16 Yoke Sleeve Aluminum-Bronze
    17 Hand Wheel Malleable Iron

    DIMENSIONAL DATAS OF ANSI CLASS 150 LB

    N PS 2 2/1/2 3 4 6 8 10 12 14 16 in
    DN 50 65 80 100 150 200 250 300 350 400 mm
    L/L1 8 8.5 9.5 11.5 16 19.5 24.5 27.5 31 36 in
    (RF/BW) 203 216 241 292 406 495 622 698 787 914 mm
    L2 8 8.5 9.5 11.5 16 19.5 24.5 27.5 31 36 in
    (RTJ) 203 216 241 292 406 495 622 698 787 914 mm
    H 15 21 17.5 20.25 22 24.25 32 35.88 48.38 57 in
    (Open) 380 535 445 515 560 615 815 910 1230 1450 mm
    Do 7 10 11 11 13 13 16 18 20 24 in
    180 240 280 280 320 320 400 450 500 60 mm
    Wt(kg.) 18 30 41 64 86 110 280 380 510 740 RE
    14 22 33 43 72 88 245 345 450 665 BW

    DIMENSIONAL DATAS OF ANSI CLASS 300 LB

    N PS 2 2/1/2 3 4 6 8 10 12 14 16 in
    DN 50 65 80 100 150 200 250 300 350 400 mm
    L/L1 10.5 11.5 12.5 14.00 17.5 22 24.5 28.00 in
    (RF/BW) 267 292 318 356 444 559 622 711 mm
    L2 11.12 12.12 13.12 14.62 18.12 22.62 25.12 28.62 in
    (RTJ) 282 308 333 371 460 575 638 727 mm
    H 16.75 19 19.88 22.50 25.25 33.25 35.5 38.62 in
    (Open) 425 485 505 570 640 845 900 980 mm
    Do 8 10 11 13 16 18 20 24 in
    200 240 280 320 400 450 500 600 mm
    Wt(kg.) 25 32 38 56 96 150 360 550 RE
    20 22 27 41 75 117 310 492 BW

    Cast steel Globe valve 600 LB / 900 LB

    APPLICABLE STANDARDS

    • Steel Globe Valves BS EN 13709/API600
    • Steel Valves ASME B16.34
    • Face To Face ASME B16.10
    • End Ranges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection And Test API 598

    DESIGN DESCRIPTIONS

    • Straight Pattern Body Design
    • OS &Y Out Side Screw and Yoke
    • Bb, Bolted Bonnet
    • Yoke Integral VVith Bonnet
    • Rising Stem And Hand Wheel
    • Loose Disc, Choice Of Plug Or
    • Renewable Seat Ring
    • Impact Hand Wheel For 1 cr &Above
    • Horizontal Service
    • Ranged Or Butt Welding Ends
    • Available With BG Operator

    MATERIALS OF PARTS

    No. Part Name Carbon Steel  ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-WC6
    2 Bonnet A216-WCB A217-WC6
    3 Disc A105+CR13 A217-F11+HF
    4 Stem A182-F6a CR-MO-V
    5 Seat Ring A105+HF A182-F11+HF
    6 Stem Backseat A276-420 A276-304
    7 Bonnet Gasket Steel Ring 304SS ring
    8 Bonnet Stud A193-B7 A193-B16
    9 Bonnet Stud Nut A194-2H A194-7
    10 Packing Graphite
    11 Gland A276-420 A276-304
    12 Gland Flange A216-WCB A217-W6
    13 Eye Bolt Pin Carbon Steel A276-420
    14 Eye Boit Carbon Steel A193-B7
    15 Eye Boit Nut Carbon Steel A194-2H
    16 Yoke Sleeve Aluminum-Bronze
    17 Hand Wheel Malleable Iron

    DIMENSIONAL DATAS OF ANSI CLASS 600 LB

    NPS 2 2/1/2 3 4 6 8 10 12 in
    DN 50 65 80 100 150 200 250 300 mm
    L/L1 11.5 13 14 17 22 26 31 33 in
    (RF/BW) 292 330 356 432 559 660 787 838 mm
    L2 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 in
    (RTJ) 295 333 359 435 562 663 790 841 mm
    H 17.5 19.75 21 24.5 29.5 36.5 44.88 53.12 in
    (Open) 445 502 533 622 750 927 1140 1350 mm
    Do 10 11 13 16 18 20 24 24 in
    240 280 320 400 450 500 600 600 mm
    Wt(kg.) 35 50 60 110 230 410 770 1140 RE
    27 34 42 84 192 350 680 1030 BW

    DIMENSIONAL DATAS OF ANSI CLASS 900 LB

    NPS 2 2/1/2 3 4 6 8 10 12 in
    DN 50 65 80 100 150 200 250 300 mm
    L/L1 14.5 16.5 15 18 24 29 33 in
    (RF/BW) 368 419 381 457 610 737 838 Mil
    L2 14.62 16.62 15.12 18.12 24.12 29.12 33.12 in
    (RTJ) 371 422 384 460 613 740 841 mm
    H 22 23.25 25.25 31.88 41.38 53.5 61.88 in
    (Open) 560 590 640 810 1050 1360 1570 mm
    Do 11 13 16 18 20 24 24 in
    280 320 400 450 500 600 600 mm
    Wt(kg.) 57 82 91 168 365 665 1250 RF
    41 53 58 117 238 538 1060 BW

    Cast Steel Gate Valve 1500 LB /2500 LB

    APPLICABLE STANDARDS

    • Steel CheckValves BS EN 13709/API 600
    • Steel Valves ASME B16.34
    • Face To Face ASME B16.10
    • End Ranges ASME B16.5
    • Butt Welding Ends ASME B16.25
    • Inspection and Test API 598

    DESIGN DESCRIPTIONS

    • PBS, Pressure Seal Bonnet
    • OS&Y Out Side Screw And Yoke
    • BB, Bolted Bonnet
    • Renewable Seat Ring
    • Rising Stem And Hand Wheel
    • Ranged Or ButtWelding Ends
    • Available With BG Operator

    MATERIALS OF PARTS

    No. Part Name Carbon Steel  ASTM Material 1/1/4cr-1/2 mo
    1 Body A216-WCB A217-WC6
    2 Bonnet A216-WCB A217-W6
    3 Disc A105+CR13 A217-F11+HF
    4 Stem A182-F6a CR-MO-V
    5 Seat Ring A105+HF A182-F11+HF
    6 Stem Backseat A276-420 A276-304
    7 Bonnet Gasket Steel Ring 304SS ring
    8 Bonnet Stud A193-B7 A193-B16
    9 Bonnet Stud Nut A194-2H A194-7
    10 Packing Graphite
    11 Gland A276-420 A276-304
    12 Gland Flange A216-WCB P.217-W6
    13 Eye Bolt Pin Carbon Steel A276-420
    14 Eye Boit Carbon Steel A193-B7
    15 Eye Boit Nut Carbon Steel A194-2H
    16 Yoke Sleeve Aluminum-Bronze
    17 Hand Wheel Malleable Iron

    DIMENSIONAL DATAS OF ANSI CLASS 1500 LB

    NPS 2 2/1/2 3 4 6 8 in
    DN 50 65 80 100 150 200 mm
    L/L1 14.5 16.5 18.5 21.5 27.75 32.75 in
    (RF/BW) 368 419 470 546 705 832 mm
    L2 14.62 16.62 18.62 21.62 28 33.12 in
    (RTJ) 371 422 473 549 711 841 mm
    H 22 23.25 29.5 36 48.62 65 in
    (Open) 560 590 750 915 1235 1650 mm
    Do 13 16 18 20 24 28 in
    320 400 450 500 600 700 mm
    Wt(kg.) 68 97 116 215 445 795 RF
    57 81 95 184 347 635 BW

    DIMENSIONAL DATAS OF ANSI CLASS 2500 LB

    NPS 2 2/1/2 3 4 6 8 in
    DN 50 65 80 100 150 200 mm
    L/L1 17.75 20 22.75 26.5 36 in
    (RF/BW) 451 508 578 673 914 mm
    L2 17.88 20.5 23 26.88 36.5 in
    (RTJ) 445 414 584 683 927 mm
    H 25.5 28.12 32.5 47 70.5 in
    (Open) 650 715 825 1195 1790 mm
    Do 16 18 20 24 28 in
    400 450 500 600 700 mm
    Wt(kg.) 97 138 167 305 633 RF
    72 95 108 196 351 BW

    Butterfly Valve

    DIMENSIONAL DATAS - ANSI CLASS 150LB

    NPS DN L L1 H1 H W MT (wafer) T
    inch mm mm mm mm mm mm kg N.m
    2 50 43 108 112 225 220 10 55
    3 80 48 114 126 255 270 12 226
    4 100 54 127 146 285 270 16 325
    *6 150 57 140 170 332 360 25 615
    *8 200 64 152 218 386 300 36 902
    *10 250 71 165 245 427 300 60 1278
    *12 300 81 178 290 498 500 80 2628
    *14 350 92 190 316 510 500 120 32713
    *16 400 102 216 352 540 600 160 4128
    *18 450 114 222 386 585 600 200 5511
    *20 500 127 229 415 642 600 270 7190
    *24 600 154 267 482 693 600 420 7814
    *30 750 165 318 622 868 600 700 16450
    *36 900 200 330 673 1000 700 1050 23501
    *42 1050 251 410 755 1058 700 1500 31963
    *48 1200 276 470 8613 1278 700 1845 47000

    DIMENSIONAL DATAS - ANSI CLASS 300LB

    NPS DN L L1 H1 H W MT (wafer) T
    inch mm mm mm mm mm mm kg N.m
    50 3
    3 80 48 114 130 265 270 15 352
    4 100 54 127 150 290 270 19 514
    *6 150 59 140 185 355 300 35 1073
    *8 200 73 152 236 418 500 42 1954
    *10 250 83 165 273 465 500 68 2453
    *12 300 92 178 313 498 600 88 3260
    *14 350 117 190 338 547 600 144 5405
    *16 400 133 216 392 582 600 185 8152
    *18 450 149 222 420 651 600 230 10223
    *20 500 159 229 Apr-65 704 600 330 13469
    *24 600 181 267 532 780 GOO 460 22827
    *30 750 318 642 908 700 1280 39726
    *36 900 330 703 1108 700 2150 63452
    *42 1050 410 785 1258 700 3150 85326
    *48 1200 470 906 1478 1000 4885 126742

    DIMENSIONAL DATAS - ANSI CLASS 600LB

    NPS DN L L1 H1 H W MT (wafer) T
    inch mm mm mm mm mm mm kg N.m
    3 80 54 180 152 305 270 38 575
    4 100 64 190 193 338 360 58 1043
    *6 150 78 210 248 416 500 120 3673
    *8 200 102 230 295 490 600 154 4520
    *10 250 117 250 342 580 600 297 7061
    *12 300 140 270 378 690 600 398 14236
    *14 350 155 290 412 715 600 535 16947
    *16 400 178 310 450 823 600 780 20473
    *18 450 200 330 512 897 GOO 898 25218
    *30 500 216 350 563 1094 700 1266 31861
    *24 600 232 390 622 1186 700 1622 46095

     

    Knife Egde Gate Valve

    The SERIES 10 model Knife Gate is an uni-directional wafer valve designed
    for general industrial service applications. The design of the body and seat 
    assures non-clogging shut off on suspended solids in industries such as:
    • Pulp and Paper 
    • Power plants 
    • Wastewater treatment plants 
    • Chemical plants
    • Food and Beverage 
    • Bulk handling
    • Mining etc.

    SIZES: 
    DN 2"/50mm to DN 24"/600mm (larger diameters on request)

    WORKING PRESSURE:
    DN 2"/50mm to DN 10"/250mm: 150 psi / (10 kg/cm2)
    • DN 12"/300mm to DN 16"/400mm: 90 psi / (6 kg/cm2)
    • DN 18"/450mm: 75 psi / (5 kg/cm2)
    • DN 20"/500mm to DN 24"/600mm: 60 psi / (4 kg/cm2)
    • Standard flange connection: DIN PN 10 and ANSI B16.5 (class 150)

    NOTE:
    other flange connections are available on request such as:
    • DIN PN 6 
    • DIN PN 16 
    • DIN PN 25
    • BS "D" and "E"p ANSI 125

    BODY: 
    Wafer style cast monoblock with raised face and with reinforced ribs in larger diameters for extra body strength. 
    • Internal cast-in gate wedges and guides allows for tighter shut-off. 
    • Full port design for greater flow capacity and minimal pressure drop. 
    • Internal design avoids any build up of solids that would prevent valve from closing.

    GATE: 
    Stainless steel gate as standard
    • Gate is polished on both sides to avoid jamming and seat damage.
    • Bottom of the gate edge is machined to a bevel to cut through solids for a tighter seal in the closed position. 
    • On request: thickness and/or material of the gate can be changed for higher pressure requirement.

    SEAT: (resilient)
    • Unique design that mechanically locks the seat in the internal of the valve body with a stainless steel retainer ring.
    • Standard EPDM also available in different materials such as Viton, PTFE, etc.

    PACKING: 
    • Long-life packing with several layers of braided fibre plus an EPDM o-ring, with an easy access packing gland ensuring a tight seal.
    • Long-life braided packing is available in a wide range of materials.

    STEM: 
    The standard stainless steel stem offers a long corrosion resistant life.
    • For rising stem handwheel actuators only, a stem protector is provided for additional protection against dust while the valve is in the open position.

    ACTUATORS: 
    All actuators supplied by SCORPIO are interchangeable, and supplied with a standard mounting kit to allow for installation on site. 

    YOKE OR ACTUATOR SUPPORT:
    • Made of EPOXY coated steel (stainless steel available on request).
    • Compact design makes it extremely robust even under the most severe conditions.

    EPOXY COATING: 
    The epoxy coating on all SCORPIO cast iron and carbon steel valve bodies and components is electrostatically applied making the valves to be corrosion resistant with a high quality finished surface.

    The SCORPIO standard colour is Royal blue.

    GATE SAFETY PROTECTION: *SCORPIO automated valves are provided with gate guards in accordance with Indian Safety Standards.
    • The design feature prevents any objects from being caught accidentally while the gate is moving.




LARGEST VALVES MANUFACTURERS / SUPPLIERS / DEALERS IN INDIA

  • Scorpio Valves Suppliers Dealers Distributors in India
    Scorpio Valves
    Suppliers
  • Scorpio Valves Suppliers Dealers Distributors in India
    Scorpio Valves
    Suppliers
  • Scorpio Valves Suppliers Dealers Distributors in India
    Scorpio Valves
    Suppliers
  • Scorpio Valves Suppliers Dealers Distributors in India
    Scorpio Valves
    Suppliers
  • Scorpio Valves Suppliers Dealers Distributors in India
    Scorpio Valves
    Suppliers
  • Scorpio Valves Suppliers Dealers Distributors in India
    Scorpio Valves
    Suppliers
  • Scorpio Valves Suppliers Dealers Distributors in India
    Scorpio Valves
    Suppliers
 
  
OUR SUMMARY:
Review Date
Reviewed Product
Scorpio Valves
Author Rating
5Scorpio ValvesScorpio ValvesScorpio ValvesScorpio ValvesScorpio Valves